3-Axis 1400/12 Flame And Plasma High Speed CNC Pipe Cutting Machine
Home » Products » CNC Pipe Cutting machine » 3-Axis 1400/12 Flame And Plasma High Speed CNC Pipe Cutting Machine
Share to:

3-Axis 1400/12 Flame And Plasma High Speed CNC Pipe Cutting Machine

Friction roller type; For medium sized pipe
Quantity:

The 3-Axis 1400/12 Flame and Plasma High Speed CNC Pipe Cutting Machine is the simplified CNC pipe cutting machine for medium size pipes. Due to the applicative workpiece diameter, this kind of Plasma Oxy-fuel CNC Tube Cutting Machine also sees fairly extensive application. For example, for making steel structures of pipe and tube, or pipe truss, etc. Under which condition whether there is bevel on the edge of the pipes or not does not matters much, for the follow-up butt join step, either with assembly or welding. Usually, at these worksites, pipe thickness is not above 8mm.

 

If it is does not need bevel or chamfer on pipe rim, the 2 most salient advantages with the 3-Axis High Speed Plasma Oxy-fuel CNC Pipe Cutting Machine are:

  1. Lower investment in machine purchase. The 3-Axis version is over USD10,000 lower price than that of 5-Axis of counterpart (Here “counterpart” means all other specification of the equipment, for example, max. tube diameter, length, etc. are all the same: 5-Axis 1400/12), or 10~ 15% less machine investment;

  2. Easier Job: The operation of 3-Axis equipment is much simpler than that of 5-Axis and 7-Axis. Which means shorter period of operator training, and less risk of mal-operation and mal-function. These can reduce running cost greatly.

 

So, the 3-Axis High Speed 3-Axis CNC Pipe Cutting Machine is a very cost-effective and tailor-made version for customers.

 

Below is specification of the 3 Axis CNC-CP 1400/12 High Speed CNC Pipe Cutting Machine:

 

Model

Technical   parameter

3 Axis CNC-CP 1400/12

Diameter Range of Pipe (mm)

300 ~ 1400

Max. Length of Pipe (mm)

12000

Thickness of Pipe (mm)

6~100   mm for flame cutting

3 ~ 25mm for plasma cutting

Cutting Speed

200∼800mm/min. for flame cutting

Around 200~ 2000mm/min. for plasma cutting

(Based on thickness of Pipe and Plasma Power)

CNC Control Axis

3 Axis of X/Y/Z

 


Home

WUXI AMASS MACHINERY CO., LTD
WUXI JACK TECHNOLOGY CO., LTD
0510-83297829
English Language: 15852755799; 
Chinese Language: 13621515089
No. 2, Ouyang Road, Runyang Village, Yang City, Luoshe Town, Huishan District, Wuxi City
© Wuxi AMASS Machinery Co., Ltd  2021 All Rights Reserved.

CONTACT US