5-Axis 2000/9 Flame And Plasma High Efficiency CNC Pipe Cutting Machine
Home » Products » CNC Pipe Cutting machine » 5-Axis 2000/9 Flame And Plasma High Efficiency CNC Pipe Cutting Machine
Share to:

5-Axis 2000/9 Flame And Plasma High Efficiency CNC Pipe Cutting Machine

Friction roller type; For medium sized pipe

The 5-Axis 2000/9 is an often-used model of CNC Tube Intersection Cut Machine, because of its medium size of diameter and length, and its “intermediate” control complicacy of 5-Axis, which can meet demand of wide range on pipe cutting and beveling.


Product Brief:

As explained in the product of 3-Axis 600-9, for small size pipe (600mm diameter) and medium& large size pipe (1400~3000mm diameter), its holding unit is different in this High Efficiency Flame and Plasma CNC Pipe Cutting Machine. The former adopts with 3-claw chuck type, and the latter friction roller type. Please check below and attached pictures on friction rollers:

 Fig Friction rollers in Text

The reason friction roller is used in medium& large range of pipe is, as explained, with the same cutting speed for all models of High Efficiency CNC Pipe Cutting Machine, or same linear velocity, during pipe revolve, medium & large diameter pipes have much less momentum than small diameter pipes, or more inertia. So, risk of pipe drifting is little, and no need to have dedicated clamping unit such as 3-claw chuck for small pipes to secure the pipe. With friction force of the friction rollers, the workpiece pipe can revolve smoothly and stably without drifting.


Advantage of friction roller structure is its ease of loading and unloading of pipe onto it, which can save labor intensity and cycle time fairly.


The friction rollers are made of #45 steel going thru special heat-treatment of quench, with strong strength and long life (no need to replace the rollers under normal condition, which means same service life as the whole CNC pipe Intersection Cutting Machine).


Below is specification of 5-Axis 2000/9 Flame and Plasma High Efficiency CNC Pipe Cutting Machine: 


Technical   parameter

5 Axis CNC-CP 2000/9

Diameter Range of Pipe (mm)

400 ~ 2000

Max. Length of Pipe (mm)


Thickness of Pipe (mm)

6~100   mm for flame cutting

3 ~ 25mm for plasma cutting

Cutting Speed

200∼800mm/min. for flame cutting

Around 200~ 2000mm/min. for plasma cutting

(Based on thickness of Pipe and Plasma Power)

CNC Control Axis

5 Axis of X/Y/Z/A/B




English Language: 15852755799; 
Chinese Language: 13621515089
No. 2, Ouyang Road, Luoshe Town, Wuxi City, Jiangsu Province, China

© Wuxi AMASS Machinery Co., Ltd  2021 All Rights Reserved.