Standard Oxy-fuel Plasma CNC Pipe Intersection Cutting Machine

A. Definition on Standard Flame Plasma CNC Pipe Cutting Machine:

1. Numerical Control: There are 5 Control axis in CNC station of this CNC Pipe Intersection Cutting Machine, for drilling hole, severing, oblique face chamfering on edges and body of pipes:

The 5 CNC control axis on pipe cutting: (Fig.1)

2. Pipe Diameter and Thickness: From Φ300mm to Φ1400mm. This can cover the extensive scope of pipe size in practical use; No specific restriction on thickness of the pipe wall for cutting;

3. Pipe Length: The max. length of workpieces pipe for this standard machine is 12,000 mm. It can be designated by customer;

4. Pipe Material and Cutting Technology in Standard CNC Pipe Cutting Machine:

1) Majority is carbon steel. Any other common used materials, such as stainless steel, Al, bronze... can also be cut in this equipment;

2) Correspondingly, oxygen fuel flame cutting with Acetylene (Or Propane) together with Plasma Power supply are all equipped in this machine;

5. Beveling Cut in Wuxi JACK CNC Pipe Cutting Machine:  (Fig.2)

1) From the above photo we can see that, compared with 3 Axis model machine, with the addition of V axis and W axis for cutting torch swing and movement respectively, customers can get much more useful functions from this advanced technique equipment: 

  CNC monitor operating interface of the machine: (Fig.3)

2) After the pipe completed cut and bevel in this machine, the workpieces pipes will be sent to next working station for processing: Welding Roller Bed for fabrication, or CNC Pipe End Face Milling Machine for end face polishing.

B. Strong points of 5 Axis 1400/12 Standard Flame Plasma CNC Pipe Intersection Cutting Equipment:

1.  The Widest Used Model in CNC Pipe Intersection Cutting Machine:

1) The standard model of 5 Axis 1400/12 is one of the most often selected models;

2) The reason is, both the size of pipe (Max. Φ1400mm) and control axis of 5 meet the demand of majority pipe cut off tasks at customers site, delivering cut hole and edge beveling practice and application;

2. High Quality and High Efficiency Pipe Cutting Job from Standard CNC Pipe Cutting Machine:

There is revolutionary change on quality and productivity of pipe cutting and beveling, with the introduction of CNC-CP series machine; 

Without this advanced technology machinery tool, the pipe and tube processing process will be very time consuming:

1) Traditionally, it is necessary to spend lots of time on lineation scribing on the workpiece, and carrying on layout out samples;

2) These manual doing production procedures are slow and volatile, and difficult to manage accuracy, and depends on skill of operators completely;

3) Now, with the introduction of this powerful machine on flame and plasma CNC control pipe cutting, all the above mentioned problems can be removed;

4) With the advanced 5 axis control in machine, the entire operation of length cutting and chamfering of pipe can be made into standardization to the most degree, and the manual steps of marking and making samples are not needed any more, improving both the productivity and quality control of pipe processing;

5) The exciting working moment of Wuxi JACK Flame Plasma CNC Pipe Cutting Machine from below photo and attached video: (Fig.4)

C. Technical Parameters of Standard Flame Plasma CNC Pipe Cutting Machine: