2Ton L Type Hydraulic Elevating And Electric Revolving Welding Positioner with Chuck
Home » Products » Welding Positioner » 2Ton L Type Hydraulic Elevating And Electric Revolving Welding Positioner with Chuck
Share to:

2Ton L Type Hydraulic Elevating And Electric Revolving Welding Positioner with Chuck

Quantity:

The 2Ton L type elevation and revolve welding positioner is medium-size of this type. It has same equipment structure and control axis& control logic as the lighter 1Ton/1.2Ton and heavier 3Ton. Depending on workpiece size, this tonnage of elevate and revolve weld positioner has vertical travel stroke of 1000~1200mm.

 

Technical characteristic of L type hydraulic lift and revolve welding positioner (For full range of loading capacity from 1Ton to 3Ton and above):

 Guideway and Carriage

    1)  As can be seen from the above picture, there are 4 pieces of ball-bearing linear guideways(the best of its

        kind) fit at the 4 edges of internal surface of machine frame, or called the left and right 2 columns (marked in

        red color square in the picture). This is similar to the product H Beam Assembly Welding Straightening 

        Integral machine. It is for the purpose of smooth and stable movement of L arm along vertical direction;

     2) Hydraulic cylinder is fit at its beneath to give power on L arm up and down travel;

     3) Hydraulic pump station is put alongside the machine frame of L type lift and revolve welding positioner

        (Due to its size of pump station for 2Ton, it can not be put inside the cavity of machine body);

     4) With the increase of workpiece weight for the 2ton and above elevate and revolve welding positioner, 

        carriage for holding the L arm is also strengthened (marked in green color square in the picture). There are 

        several pieces of stiffeners welded onto the carriage;

     5) Also due to the heavier workpiece applied in this and higher tonnage of lift and revolve weld positioner,

        safety is the foremost considered factor. Warning signs and lights are introduced to the equipment. Check

        below picture. (marked in red color square in the picture);

Warning and Cover

     6) From the same picture we can observe, that dust-proof cover is put on the motioning unit of the L type

        elevation and revolve weld positioner (marked in yellow color square in the picture), this gives contamination

        control protection on this equipment working in rigorous welding environment.

 

Another complement is with its hydraulic drive for L arm elevation, there is other customary addressing on the equipment, as elevate and revolve electric welding positioner, or electric lift and revolve welding positioner.

 

We will have more topic on this series of L type elevate and revolve hydraulic welding positioner in the next section of 3Ton.


Home

WUXI AMASS MACHINERY CO., LTD
WUXI JACK TECHNOLOGY CO., LTD
0510-83297829
English Language: 15852755799; 
Chinese Language: 13621515089
No. 2, Ouyang Road, Luoshe Town, Wuxi City, Jiangsu Province, China

CONTACT US
© Wuxi AMASS Machinery Co., Ltd  2021 All Rights Reserved.
备案证书号:苏ICP备13045244号-1