Double Table Top Head And Tail Horizontal Welding Positioner
Home » Products » Welding Positioner » Double Table Top Head And Tail Horizontal Welding Positioner
Share to:

Double Table Top Head And Tail Horizontal Welding Positioner

Quantity:

This double table top head and tail welding positioner is another frequently-used welding equipment in Engineering machinery facilities. Often it is found to be used for welding workpiece such as boom, frame carriage of excavator, etc.

 

The reason it is nominated as “Double Work Table Head and Tail Welding Positioner”, is because:

   1) It belongs to two table top style welding positioner;

   2) But same as the previous fixture type, these both ends of work tables are reduced to two bodies. The

      actual work table is the bridging unit of the two (workpiece);

   3) This head and tail weld positioner is split type, not the integral style as the fixture type;

   4) The machine bodies at both ends can be viewed as head and tail respectively.

 Operating site

Its features and usage can be summarized as:

   1) The two machine bodies at both ends are equipped with chucks on it, for the purpose of fitting workpiece;

   2) With the workpiece installed between the two machine bodies, operator can perform welding operation

      on the workpiece;

   3) The workpiece is at “lying down” position, or more accurately described as “hanging in the air in flat

       position”. This is the reason the equipment can be called as horizontal head and tail welding positioner;

   4) Such kind of design forms operating station of open type and low height, which is easy, safe, and 

      comfortable for welding operation;

   5) One side of the machine body is fixed type, with motor reducer installed, serving as driving side of this double

      table top head and tail weld positioner;

   6) The opposing side of the machine body can be pushed or pulled along the ground rail forward and 

      backward, accommodating changeable length of workpiece;

   7) With one control axis (revolve) of this head and tail horizontal welding positioner, circumferential welding/ 

     longitudinal welding can befulfilled with manual job;

   8) Other operations such as inspection, grounding, repair weld, etc. can be also be carried out with this head

      and tail horizontal weld positioner;

   9) The equipment is motor reducer drive. Revolving speed is usually constant, or adjustable, depending on 

      practical use requirement;

   10) Operation of this double work table head and tail weld positioner is made with buttons integrated on 

       machine body;

    11)   This horizontal head and tail weld positioner is custom made.


Home

WUXI AMASS MACHINERY CO., LTD
WUXI JACK TECHNOLOGY CO., LTD
0510-83297829
English Language: 15852755799; 
Chinese Language: 13621515089
No. 2, Ouyang Road, Luoshe Town, Wuxi City, Jiangsu Province, China

CONTACT US
© Wuxi AMASS Machinery Co., Ltd  2021 All Rights Reserved.
备案证书号:苏ICP备13045244号-1