Advanced Configuration SXBJ-3 Double Heads Plate Edge Milling Machine

A. The Property and Technical Features of Advanced Configuration SXBJ-3 Steel Plate Edge Milling Machine:

As a set of truly sense advanced configuration Steel Plate Edge Milling Machine, there are many leading edge function elements equipped in this set of SXBJ-3 Sheet Metal Plate Chamfering Machine, which can be picked up three of them and introduced briefly as below:

1. HMI Adopted in SXBJ-3 Sheet Metal Plate Beveling Machine:

1) As can be observed from the attached 1^st and 5^th photos of this product section, each of the milling carriages of this Sheet Metal Plate Chamfering Machine has a piece of HMI (Human machine interface) installed on the door of its control board:

2) The HMI touch screen on door of control cabinet in Steel Plate End Milling Machine: (Fig.1)

3) Advantages of HMI for Running of the SXBJ-3 Steel Plate End Milling Equipment:

a) By means of this HMI and its touch screen, the process control parameters of the Edge Milling Machine can be input by operator conveniently;

b) The process control parameters can be displayed intuitively in real time during operation of the Edge Milling Machine;

c) Especially tilting angle of the milling head, which equals to finished beveling angle of the Edge Milling Machine, can be managed precisely;

d) The HMI and its touch screen for running of the Sheet Metal Plate Chamfering Machine: (Fig.2)

2. The Milling Operation Ammeter on Milling Unit of the SXBJ-3 Sheet Metal Plate Chamfering Machine:

1) On each of the milling heads of this SXBJ-3 Steel Plate Edge Milling Machine, there is a piece of ammeter installed, shown as below: (Fig.3)

2) Usage: With this ammeter, the milling operation current, which directly corresponds with cutting depth of milling operation in the Steel Plate End Milling Machine, can be controlled and displayed easily, which is critical for managing edge milling operation efficiency and quality of the Edge Milling Machine;

3) The superior edge milled steel plate produced from the SXBJ-3 Steel Plate End Milling Equipment: (Fig.4)

4) Here we stress that, milling current Ammeter is the exclusive (Solitary owned) function of Wuxi JACK Edge Milling Machine milling head;

3. Wider Range of Grooving Produced from the SXBJ-3 Steel Plate End Milling Machine:

1) As can be found from the attached 6^th photo and below, one of two sets of milling heads in this advanced configuration Edge Milling Machine has the milling angle range of 0° ~ 80°, which is useful for making flat surface large area edge milling;

2) The 0° ~ 80° angle scope milling head equipped with the SXBJ-3 Steel Plate Edge Milling Machine: (Fig.5)

3) Please check the attached video of this product section, to observe the 75° edge milling operation of this set of SXBJ-3 Edge Milling Machine running at customer facility, and the corresponding HMI touch screen indication.

B. The Main Specifications of SXBJ-3 Steel Plate Edge Milling Machine:

1. As a set of small model but advanced configured Sheet Metal Plate Beveling Machine, this SXBJ-3 Edge Milling Machine has 2 sets of milling units installed on its working table, as you can observe from the attached photos and below;

2. Working side of the SXBJ-3 Sheet Metal Plate Beveling Machine: (Fig.6)

3. Of these, one set of the milling unit is responsible for making straight and upper edge grooving, in the angular range of 0° ~ 80°;

4. The other set of the milling unit is responsible for making Lower edge grooving, in the angular range of -45° ~ 0°;

5. The 2 sets of the milling units are installed in different orientations in this double heads Edge Milling Machine, which can be identified at the first glance.

C. Different Installation Orientations of the 2 sets of Milling Heads in SXBJ-3 Steel Plate Edge Milling Machine:

1. The Milling Head for Performing Straight and Upper Edge Grooving in the Sheet Metal Plate Chamfering Machine:

1) The installation orientation of the milling head in the Edge Milling Machine: (Fig.7)

2) Shown in the attached 2^nd and 3^rd photos and above, the facer blade of the milling head “faces straight forward or downward”, for making straight side or upper edge grooving in the Edge Milling Machine;

2. The Milling Head for Performing Lower Edge Grooving in the Steel Plate End Milling Machine:

1) The installation orientation of the milling head in the Edge Milling Machine: (Fig.8)

2) Shown in the attached 4^th photo and above, the facer blade of the milling head “faces upward”, for making bottom edge grooving in the Edge Milling Machine.

D. Technical Parameters of SXBJ-3 Advanced Configuration Steel Plate Edge Milling Machine:

Below are technical parameters for this SXBJ-3 Double Heads Sheet Metal Plate Beveling Machine: