YTJ-series Hydraulic Vertical High Power H Beam Straightening Machine
Home » Products » H Beam Straightening machine » YTJ-series Hydraulic Vertical High Power H Beam Straightening Machine
Share to:

YTJ-series Hydraulic Vertical High Power H Beam Straightening Machine

Quantity:

YTJ-series hydraulic high power H Beam straightening machine can be generalized as:

  1) Same as mechanical H Beam straightening equipment, it is used for straightening H Beam flange deform;

  2) Same as mechanical type, during straightening, H Beam is put in the position of “Standing”, or flange in vertical direction, check below sketch;

H Beam


  3) Straightening principle of the Hydraulic H Beam Straighten Machine isdifferent from mechanical type,  It will be

     introduced in next product of YTJ-40; 

  4) Steel of H Beam straightened with hydraulic and mechanical is different: Mechanical H Beam straightening

     machine is for Q235, with tensile strength 370~510MPa; Hydraulic H Beam straightening machine is for Q345,

     with tensile strength 510~600MPa;

  5) Different from mechanical type, straightening operation of the hydraulic high power H Beam straightening

     equipment is driven with hydraulic system, instead of motor reducer. Hence, it has higher capacity in terms of

     flange thickness that can be straightened;

  6) Different from mechanical type, hydraulic H Beam straightening machine is not frequently used in automatic H

     Beam production line. Because mechanical type can meet the demand of most majority H Beam produced with

     the automatic line;

  7) Flange thickness range for standard Hydraulic H Beam straighten machine: Its lower limit is upper limits of 

     mechanical type of 40mm; Upper limit is 80mm. And we can produce the special type of equipment with higher

     capacity if customer need;

  8)  Application scenario of hydraulic H Beam straightening equipment: At the facility and construction site where

       workpiece of excessive thickness needs to be straightened. Such as Heat Engine Plant, Structure Frame for

      supporting Boiler/ Furnace, or large Steel Structure Workshop;

  9) Workpiece type of hydraulic high power H Beam straightening equipment: Usually beam of small cross size

      with big thickness;

  10) There are 4 models of YTJ-40/50/60/80 to choose from based on Flange/ Web thickness. And as mentioned in

      item 5), we have capability on designing and producing custom-made hydraulic H Beam straightening machine

     with flange thickness higher than 80mm;

  11) Parameters of these standard hydraulic high power H Beam straightening machine see table below. We can

       see there exist 2 ranges of YTJ40/50/60 and YTJ-80:

 

PARAMETER

MODEL

NOTE


YTJ-40

YTJ-50

YTJ-60

YTJ-80

Special   made available

H Beam material

Tensile strength   510~600MPa

Max.   Flange Thickness (s) (mm)

(For   Q345-A, Tensile Strength ≤600MPa)

40

50

60

80

Flange   Width (b) (mm)

200 - 800

300 ~ 1200

Web   Thickness (a) (mm)

≤40

≤50

≤60

≤60

Web   Height (h) (mm)

200~ 1500

500 ~ 2500

Straightening   Speed (mm/min)

≈9000

≈6300


Power   Supply

3P 380V, 50 Hz(Chinese Power Standard; Can be with Customer’s National   Standard)


  12)  One operator can manage working process of these YTJ-series hydraulic high power H Beam straighten machine covering load/unload/straightening.


Home

WUXI AMASS MACHINERY CO., LTD
WUXI JACK TECHNOLOGY CO., LTD
0510-83297829
English Language: 15852755799; 
Chinese Language: 13621515089
No. 2, Ouyang Road, Luoshe Town, Wuxi City, Jiangsu Province, China

CONTACT US
© Wuxi AMASS Machinery Co., Ltd  2021 All Rights Reserved.
备案证书号:苏ICP备13045244号-1