SXBJ-6 Double Milling Head Universal Plate Beveling Machine
Home » Products » Plate Beveling Machine » SXBJ-6 Double Milling Head Universal Plate Beveling Machine
Share to:

SXBJ-6 Double Milling Head Universal Plate Beveling Machine

Quantity:

The SXBJ-6 Universal Plate Beveling Machine has 2 milling heads, which make its efficiency 2 times that of single-head XBJ-6 Plate Edge Milling Equipment.

 

For the size of 6m long edge mill operation, single head is more often seen in application. However, there are certain circumstances under which double milling heads is more suitable than single head for the edge mill equipment. This model of machine is the medium size of plate edge milling equipment, and can be used at facilities of steel structure, construction machinery, petrochemical vessel, to chamfer edge of the metal plate into required type of bevel for next step of welding operation, so it is a kind of “universal” machine. And, thanks to its medium size, it is relatively easy to make arrangement of the plate bevel machine into the layout of whole workshop.

 

Below is list of main components of SXBJ-6 universal plate beveling machine:

No.

Unit

Specification

Qty

Note

Main   outsourcing parts:

1

Milling head


2

7.5kW, adjusted by hand wheel, made in Taiwan

2

Hydraulic station


1

Independent pump station

3

Facer plate


1

Standard, made inChina

4

Inverter


2

Mitsubishi

5

Up guideway


1

Taiwan HIWIN linear guideway HGH45CA

Main machined   and self-made components:

1

Machine bed


1 set

Integrally annealed after welding and then planed,   stable and accurate

2

Down guide rail

45#

carbon steel

1 set

Tempered, surface hardness HRC48-52,

Ground integrally, uniform size

3

Guard of guide


1 set

2-level guard again dust

4

Safety icon


1 set

Striking safety icon conforms to international   standard







 

And below is specification of the SXBJ-6 Double Milling Head Plate Beveling Machine:

 

No.

Parameter

Value

Note

1

Max. length of plate machined one pass

6000mm


2

Plate thickness

6-50mm


3

Distance from pack to worktable

80mm


4

Milling angle

Top milling   unit

0° to +45°

Adjust by   manual

Down milling   unit

-45° to 0°

5

Edge Milling speed

   130∼1000mm/min. (VFD, Inverter Control)

6

Idle Speed

   4000mm/min.

 


Home

WUXI AMASS MACHINERY CO., LTD
WUXI JACK TECHNOLOGY CO., LTD
0510-83297829
English Language: 15852755799; 
Chinese Language: 13621515089
No. 2, Ouyang Road, Luoshe Town, Wuxi City, Jiangsu Province, China

CONTACT US
© Wuxi AMASS Machinery Co., Ltd  2021 All Rights Reserved.
备案证书号:苏ICP备13045244号-1