ZHJ5010 Special Made Light Duty H Beam Fabrication Machine

The attached is a set of ZHJ5010 Special Made Light Duty Automatic H Beam Fabrication Machine exported by Wuxi JACK for a customer in Chelyabinsk Russia in July. 2021.

1. Customer Demand on ZHJ5010 Welding I Beam Fabrication Machine:

1) Workpiece Specifications of the ZHJ5010 I Beam Fabrication Machine:

a) Purpose and Output: Customer planned to use this tailor made H Beam Assembly Weld Straighten Integrated Machine to produce small size and light weight welding H Beam/ I Beam/ T Beam, with higher demand on IK value of welding seam;

b) Finished Working Parts Specifications from ZHJ5010 H Beam Assembly Weld Straighten Integrated Machine: 

i. H Beam Flange Width Range:  80~ 500 mm (In comparison, "Standard" workpiece: 150~ 750 mm.);  

ii. H Beam Flange Thickness Range: 6~ 20 mm (In comparison, "Standard" workpiece: 6~40 mm);

iii. H Beam Web Height Range: 160~ 1000 mm (In comparison, "Standard" workpiece: 200~ 1500 mm.);  

iv. H Beam Flange Thickness Range: 6~ 16 mm (In comparison, "Standard" workpiece: 6~40 mm);

v. H Beam Length Range: 3,000~ 20,000 mm (In comparison, "Standard" workpiece: 3,000~ 15,000 mm);

c) So, much smaller workpieces in this tailor made Automatic H Beam Welding Machine compared with those manufactured from standard models (ZHJ8015/ ZHJ8018/ ZHJ8020) of Integrated function I Beam Fabrication Machine;

2) Welding Modes Available in Special Made ZHJ5010 SAW H Beam Welding Equipment:

a) Due to the fairly percentage of very small thickness (Less than 5~6mm) workpiece to be welded, and higher demand on welding seam rigidity, both the traditional SAW (Submerged arc welding) and CO₂ gas shielded welding are introduced in this tailor made Automatic H Beam Welding Machine. The SAW is used for welding medium thickness workpiece (6~ 20mm), while CO₂ for small thickness ones (≦6mm);

b) For this reason, the ZHJ5010 H Beam Assembly Weld Straighten Integrated Machine should have capability on performing both types of welding mode.

2. Wuxi JACK Technical Proposal on ZHJ5010 Automatic H Beam Welding Machine:

Wuxi JACK Leading Position: As the pioneer and front runner in H Beam Fabrication Machine (I Beam Fabrication Machine), Wuxi JACK has gained rich experience in design and manufacture the equipment to meet the specific demand from customers over the decades. Based on request from customer, the ZHJ5010 Automatic H Beam Welding Machine should be in the style of:

1) Mechanical Main Body of the ZHJ5010 I Beam Fabrication Machine:

a) Redesign and calculate for the designated specification workpieces. Compared with the standard size of (4,000mm width x 4,200mm height x 28,000mm length), the ZHJ5010 integrated function Automatic H Beam Welding Machine should have the overall dimension of (4,000mm width x 3,600mm height x 40,000mm length);

b) The sub-assemblies have reduced sizes accordingly. Please check the attached 1^st photo on appearance of the whole set of ZHJ5010 H Beam Assembly Weld Straighten Integrated Machine at Russian customer’s site; And its input conveyor in the 2^nd photo;

2) Welding System in ZHJ5010 I Beam Fabrication Machine:

a) The ZHJ5010 Integrated function I Beam Fabrication Machine (H Beam Fabrication Machine) is equipped with 2 types of welding system: SAW and CO₂ respectively, with SAW as major welding made, and CO₂ MIG/MAG as backup supporting mode;

b) Please check the attached 3^rd photo. Control console of SAW power supply (Black color, on the top) and operating panel of the H Beam Welding Equipment are installed at the right column of machine main body, and control consoles of CO₂ MIG/MAG are installed at the left column (Not shown in the photo). This is requested by customer;

c) 100% Validation before Delivery: To make sure satisfactory CO₂ gas shielded welding quality with this tailor made Automatic H Beam Welding Machine, Wuxi JACK had validated this welding mode repeatedly until 100% making sure no problem. Please check the attached video on validating process at Wuxi JACK workshop.

3. Technical Parameters of ZHJ5010 I Beam Fabrication Machine:

Below are technical specifications of this ZHJ5010 model Integral Function Automatic H Beam Welding Machine: