Availability: | |
---|---|
Quantity: | |
a) As shown in the attached photos and below small picture, SXBJ-15 double heads sheet metal plate Edge Beveling Machine has effective long stroke of 15,000 mm, for making welding grooves on top and bottom edges of workpiece metal plates:
a) With two sets of 7.5kW milling head installed on its motorized moving carriages, this double heads Large Stroke Steel Plate Edge Milling Machine fulfils task of welding groove making on upper/ lower/ straight/ slant edges of workpiece steel plate, in the working mode of milling facer blade in high speed revolution:
1) The mechanical working table and body of SXBJ models double heads Large Stroke Steel Plate End Beveling Equipment should guarantee its rigidity and precision uniform along the entire length of edge milling stroke;
2) This is the precondition for making sure long term successful running of the SXBJ-15 and other models of large stroke Edge Milling Machine;
3) Process Route on making mechanical bed of Edge Milling Machine: For this purpose, the mechanical body of Wuxi JACK XBJ and SXBJ series sheet metal plate End Milling Machine are made from high quality mild steel, with its size and thickness in fully sufficient specification, fabricated into subassemblies, and then went through advanced level heat treatment to have stress relieved, and precisely controlled for final assembly. Check below photo:
a) The attached pictures show a set of Wuxi JACK SXBJ-15 Edge Milling Machine applied in a Shipyard facility;
b) The other working sites where Large Stroke Steel Plate End Milling Machine, including SXBJ-15 here, and SXBJ-125 model, and SXBJ-18 model, are often selected by customers, include Port Machinery plant, Bridge Construction, Power Plan, etc.;
a) In the field of Large Machinery Production and Large Projects Construction, one of the indispensable steps at its beginning of process route, is to have welding and fabricating on large size (Length and width), thick thickness, and heavy weight metal plates, especially steel plates;
b) To get a eligible welding seam on these steel plates, especially with thickness thicker than 15mm, welding grooves of 0° ~90° angular scope, the majority close to 45°, should be made on edges of these steel plates, by means of XBJ single head and SXBJ series double heads Edge Milling Machine;
1) Wuxi JACK provides to customers foundation drawing before delivery, and customer can make foundation based on it;
2) The most important control point during installation of Edge Milling Machine, is for adjusting its mechanical bed levelness;
At the completion of Edge Milling Machine foundation making, the levelness adjustment on its working table is carried out based on the below standards of:
1) Levelness of the entire worktable length of the Edge Milling Machine, should be within the tolerance of 0.8 mm/m;
2) Parallelism between Edge Chamfering Machine worktable and pressing beam, should be controlled within the tolerance of 0.6 mm/m;
3) Linearity along the whole length of End Milling Machine worktable, as in the case of this SXBJ-15 large stroke Edge Milling Machine, which is 16m, should be controlled within the tolerance of 0.5 mm/ 15m;
3. Only after the above mentioned adjustments completed during installation and adjustment on the Steel Plate Edge Beveling Machine, can the bolts for securing connection between worktable and pressing beam being tightened;
4. Following that, make the second time cement pouring for the plate End Beveling Equipment installation;
5. After curing time of the second time cement pouring, tighten mechanical body and loading racks of the Steel Plate Edge Milling Machine, by means of anchor bolts.
Below are technical parameters of this SXBJ-15 Double Heads Large Stroke Steel Plate Edge Chamfering Machine:
Model Technical Parameter | SXBJ-15 Double Heads Large Stroke Steel Plate End Milling Machine |
Steel Plate Edge Milling Max. Length Stroke | 15,000 mm |
Steel Plate Edge Milling Width Range | 600 ~ 3000 mm |
Steel Plate Edge Milling Thickness Range | 6∼ 100 mm (Based on customer demand) |
Quantity of Hydraulic Drive Pressing Jacks | 25 Pieces |
Edge Milling Head Quantity | 2 Sets |
Edge Milling Angle Range of Top Milling Head | 0° to +80° |
Edge Milling Angle Range of Bottom Milling Head | -45° to 0° |
Power and rpm of Edge Milling Head | 7.5 kW, 1440 rpm (Higher Power available) |
Spindle rpm of Edge Milling Head | 75 ~ 420 r/min., 6 grades by handwheel |
Hydraulic Power Motor | 5.5 kW |
Taper Hole of Milling Spindle End | ISO 50 (7:24) |
Milling Head Spindle Stroke | 100 mm |
Edge Milling Working Speed | 150∼1000 mm/min. Stepless controlled with A.C. inverter |
Idle High Speed of Milling Head and Moving Carriages | Fixed 4000 mm/min. |
Applicable Diameter of Facer Blade | D=Ø125 ~ Ø320mm (Ø200mm for making delivery) |
Quantity of Hydraulic Jack Screw | 4 sets, intermittently installed |
Edge Milling Machine Worktable Width | 550 mm |
Worktable Height | 1050 mm |
a) As shown in the attached photos and below small picture, SXBJ-15 double heads sheet metal plate Edge Beveling Machine has effective long stroke of 15,000 mm, for making welding grooves on top and bottom edges of workpiece metal plates:
a) With two sets of 7.5kW milling head installed on its motorized moving carriages, this double heads Large Stroke Steel Plate Edge Milling Machine fulfils task of welding groove making on upper/ lower/ straight/ slant edges of workpiece steel plate, in the working mode of milling facer blade in high speed revolution:
1) The mechanical working table and body of SXBJ models double heads Large Stroke Steel Plate End Beveling Equipment should guarantee its rigidity and precision uniform along the entire length of edge milling stroke;
2) This is the precondition for making sure long term successful running of the SXBJ-15 and other models of large stroke Edge Milling Machine;
3) Process Route on making mechanical bed of Edge Milling Machine: For this purpose, the mechanical body of Wuxi JACK XBJ and SXBJ series sheet metal plate End Milling Machine are made from high quality mild steel, with its size and thickness in fully sufficient specification, fabricated into subassemblies, and then went through advanced level heat treatment to have stress relieved, and precisely controlled for final assembly. Check below photo:
a) The attached pictures show a set of Wuxi JACK SXBJ-15 Edge Milling Machine applied in a Shipyard facility;
b) The other working sites where Large Stroke Steel Plate End Milling Machine, including SXBJ-15 here, and SXBJ-125 model, and SXBJ-18 model, are often selected by customers, include Port Machinery plant, Bridge Construction, Power Plan, etc.;
a) In the field of Large Machinery Production and Large Projects Construction, one of the indispensable steps at its beginning of process route, is to have welding and fabricating on large size (Length and width), thick thickness, and heavy weight metal plates, especially steel plates;
b) To get a eligible welding seam on these steel plates, especially with thickness thicker than 15mm, welding grooves of 0° ~90° angular scope, the majority close to 45°, should be made on edges of these steel plates, by means of XBJ single head and SXBJ series double heads Edge Milling Machine;
1) Wuxi JACK provides to customers foundation drawing before delivery, and customer can make foundation based on it;
2) The most important control point during installation of Edge Milling Machine, is for adjusting its mechanical bed levelness;
At the completion of Edge Milling Machine foundation making, the levelness adjustment on its working table is carried out based on the below standards of:
1) Levelness of the entire worktable length of the Edge Milling Machine, should be within the tolerance of 0.8 mm/m;
2) Parallelism between Edge Chamfering Machine worktable and pressing beam, should be controlled within the tolerance of 0.6 mm/m;
3) Linearity along the whole length of End Milling Machine worktable, as in the case of this SXBJ-15 large stroke Edge Milling Machine, which is 16m, should be controlled within the tolerance of 0.5 mm/ 15m;
3. Only after the above mentioned adjustments completed during installation and adjustment on the Steel Plate Edge Beveling Machine, can the bolts for securing connection between worktable and pressing beam being tightened;
4. Following that, make the second time cement pouring for the plate End Beveling Equipment installation;
5. After curing time of the second time cement pouring, tighten mechanical body and loading racks of the Steel Plate Edge Milling Machine, by means of anchor bolts.
Below are technical parameters of this SXBJ-15 Double Heads Large Stroke Steel Plate Edge Chamfering Machine:
Model Technical Parameter | SXBJ-15 Double Heads Large Stroke Steel Plate End Milling Machine |
Steel Plate Edge Milling Max. Length Stroke | 15,000 mm |
Steel Plate Edge Milling Width Range | 600 ~ 3000 mm |
Steel Plate Edge Milling Thickness Range | 6∼ 100 mm (Based on customer demand) |
Quantity of Hydraulic Drive Pressing Jacks | 25 Pieces |
Edge Milling Head Quantity | 2 Sets |
Edge Milling Angle Range of Top Milling Head | 0° to +80° |
Edge Milling Angle Range of Bottom Milling Head | -45° to 0° |
Power and rpm of Edge Milling Head | 7.5 kW, 1440 rpm (Higher Power available) |
Spindle rpm of Edge Milling Head | 75 ~ 420 r/min., 6 grades by handwheel |
Hydraulic Power Motor | 5.5 kW |
Taper Hole of Milling Spindle End | ISO 50 (7:24) |
Milling Head Spindle Stroke | 100 mm |
Edge Milling Working Speed | 150∼1000 mm/min. Stepless controlled with A.C. inverter |
Idle High Speed of Milling Head and Moving Carriages | Fixed 4000 mm/min. |
Applicable Diameter of Facer Blade | D=Ø125 ~ Ø320mm (Ø200mm for making delivery) |
Quantity of Hydraulic Jack Screw | 4 sets, intermittently installed |
Edge Milling Machine Worktable Width | 550 mm |
Worktable Height | 1050 mm |