DX2060 Efficient H Beam End Face Milling Machine
Home » Products » H Beam End Face Milling Machine » DX2060 Efficient H Beam End Face Milling Machine
Share to:

DX2060 Efficient H Beam End Face Milling Machine

Availability:
Quantity:

In the first photo, operator was checking finished end milling quality on a piece of pipe workpiece, in a set of DX2060 H Beam End Milling Machine. So, we can call this equipment Pipe End Face Milling Machine also.



1. Applicating Range of DX2060 H Beam End Facing Machine:

1)       DX2060 is another middle large specification of DX-series Pipe End Milling Machine. It has 2m longer horizontal stroke than that of DX2040 Pipe End Facing Machine. The two models are sibling products;

2)       For the ease of end facing on beam structure members with nearly square cross section shape, length of horizontal stroke is usually about the similar size as height of vertical stroke. Meanwhile, as customer, you can determine your preferred horizontal working stroke in the Pipe End Face Milling Machine;

3)       The previous working stations preceding DX-series Beam End Milling Machine is Welding Rotator and Welding Manipulator, which are responsible for doing circumferential and longitudinal welding in the pipe structure members respectively.



2. Technical Highlights of DX-series Welding Structure Beam End Milling Machine:

1)       Flexible Size of Horizontal Stroke:

a)       Please check the 2nd photo. For DX-series I Beam End Milling Machine, guarding unit of horizontal base bed is of cascading style, which is made from stainless steel. Together with horizontal travel of vertical column along machine base bed, the guarding unit is sleeved in and out accordingly, protecting the heavy-duty precise guiderail from being infiltrated with foreign particles and milling scraps. The guarding unit has the advantages of good seal, good dissipation and long life;

b)      Under the primary parameter of vertical stroke as we discussed in product section of DX2040 Pipe End Face Milling Machine, horizontal stroke is the secondary tier specification in model determination of the equipment. This is the reason why valid horizontal stroke is optional parameter in the I Beam End Facing Machine. Which means, customer can denote their required horizontal stroke for the purchased DX-series H Beam End Milling Machine;

c)       There is a peep hole on the guard cover, thru which lubricating and cleanness condition of the precise guiderail can be observed during work;

2)       Contamination Control:

a)       DX-series Pipe End Face Milling Machine is a kind of precise processing equipment, and strict contamination control is of vital importance for maintaining high standard level of finished goods quality;

b)      There are series of measures taken by Wuxi JACK in the order-to-delivery loop of the DX-series H Beam End Facing Machine:

i.           Please check attached picture. Horizontal precise linear guiderail on the machine base bed is protected with the cascading stainless steel cover;

ii.           Please check attached picture. Vertical precise linear guiderail on the upright column is protected against scraps by means of black-color organ shield;

iii.           The horizontal transmission element of gear rack in the Pipe End Milling Machine is protected with the cascading stainless steel cover also;

iv.           The vertical transmission element of integral piece of leadscrew is protected with the black-color organ shield also;

v.           The vertical installed motor responsible for column movement in the H Beam End Milling Machine is protected inside the column, with a square opening in the column bottom for heat dissipation;

3) End Facing process:

a)       Besides the basic function of vertical end face milling, the DX-series H Beam End Facing Machine is entailed with function of beveling. Please check the 4th photo: The facing head can be tilted integrally within the range of 0~45º along the T-slot of the installation board, in the vertical plane of workpiece end face;

b)      This is the unique feature of DX-series I Beam End Milling Machine made by Wuxi JACK in the market.


3. Technical Parameters:

Below are parameters of DX2060 Pipe End Face Milling Machine (Pipe End Facing Machine):

Technical   parameter

DX2060 H Beam End Milling Machine

(H   Beam End Facing Machine)

Applicable Max. Workpiece   Cross Section Height (mm)

2000

Applicable Max. Workpiece   Cross Section Width (mm)

6000

Facing Head Power

7.5KW

Horizontal Facing   Speed for Workpiece Width

Continuous within 100 ∼ 600mm/min,   Inverter Control, variable frequency drive

Vertical Facing Speed   for Workpiece Height

Continuous within 100 ∼ 600mm/min,   Inverter Control, variable frequency drive

No Working High Speed   of Column and Milling Carriage

1200 mm/min.

Facing Head   Spindle Rotation Speed

100 ~ 630 rpm

Angle of Facing Head   along Vertical Surface

0º∼45º

Horizontal Drive   Motor

2.5 kW

Vertical Drive   Motor

3 kW


Previous: 
Next: 

Home

WUXI AMASS MACHINERY CO., LTD
WUXI JACK TECHNOLOGY CO., LTD
0510-83297829
English Language: 15852755799; 
Chinese Language: 13621515089
No. 2, Ouyang Road, Luoshe Town, Wuxi City, Jiangsu Province, China
CONTACT US
© Wuxi AMASS Machinery Co., Ltd  2021 All Rights Reserved.
备案证书号:苏ICP备13045244号-1