As shown in the attached photos, this model of large machine has relatively big height and short length, which is used for high precision cutting and slant chamfering on pipes, tanks, etc.:
1) The Max. size of workpieces available for being cutting is Diameter Φ2000mm, length 6000mm, thickness up to 100mm for flame cutting;
2) The classical cutting kerfs and swiveling grooves that can be cut from Wuxi JACK 7 Axis 2000/6 High Precision CNC Pipe Intersection Cut Equipment: (Fig.1)
3) Thermal Cutting Mode: Both flame cutting and plasma cutting available. Considering the large diameter of pipe, flame cutting is more applicable for 2000/6 specification of machine;
2. In a nutshell, same as 7 Axis 2500 series model, here the 7 Axis 2000mm group machine, is the make up to the pipe diameter gap between Φ1400mm and Φ3000mm, enriching the product specifications of CP series Flame and Plasma CNC Pipe Cutting Machine.
Due to the spatial distribution of 7 Axis, it is impossible to illustrate on all the 7 axis in one sketch. So, we use 2 sketches to present these 7 Axis in the field of CNC control pipe cutting:
1. The X/ Y/ Z/ A/ B axis in Wuxi JACK 7 Axis High Precision Flame and Plasma CNC Pipe Intersection Cut Equipment: (Fig.2)
2. The V/ W axis in 7 Axis model Machine: (Fig.3)
Shown in the above sketch, the W axis movement is for friction supporting rollers holding and revolving workpiece during pipe cutting operation. It works in the same principle as Welding Rotator.
1. Sophisticated and Precise Control: In the application field of CNC control pipe cutting, 7 Axis is synonym of “high precision”, which mean all around high standard control on this machinery. Of which, the fitting and manipulating unit of cutting torch is of vital importance, and is apt to be ignored. However, it is the “final” and direct mechanism, for guaranteeing on high precision of pipe cutting and beveling process and performance;
2. Wuxi JACK Technical Strength: On this aspect, this Wuxi JACK has unique design on cutting torch manipulating cell, which is superior to that of other suppliers. Please check below photo and attached ones:
The cutting torch manipulating and swiveling element in Wuxi JACK CNC Pipe Intersection Cutting Machine: (Fig.4)
3. As can be seen from the above photo, the cutting torch unit of Wuxi JACK Oxygen fuel CNC Pipe Intersection Cut Equipment adopts gear and or bevel gear at all the revolving joints of the cutting torch unit, not a shaft at that of the competitors. Such kind of design makes motioning and positioning of the cutting torch boosting the highest degree of accuracy. It is just one of the examples showing how do Wuxi JACK pay every attention on every detail of all our products.
Model Technical Parameter | 7 Axis 2000/6 High Precision Flame and Plasma CNC Pipe Intersection Cutting Machine |
Valid Diameter Range of Pipe | 400 ~ 2000 mm |
Valid Max. Length of Pipe | 6000 mm |
Valid Thickness Range of Pipe | 6~ 100 mm for flame cutting; 3 ~ 25mm for plasma cutting |
Valid Cutting Speed | 200∼ 800mm/min. for flame cutting Around 200~ 2000mm/min. for plasma cutting (Based on thickness of Pipe and Plasma Power) |
Active CNC Control Axis | 7 Axis of X/ Y /Z /A /B /V /W X Axis: For cutting torch movement along pipe longitudinal; Y Axis: For managing workpiece revolving; Z Axis: For lifting and lowering down cutting torch; A Axis: For tilting cutting torch along workpiece radius; B Axis: For tilting cutting torch along pipe longitudinal; V Axis: For moving cutting torch along workpiece radius; W Axis: For moving pipe supporting rollers along transverse |