There are 4 labels fitting for this model of 3 Axis 600/6 Plasma and Oxy-fuel CNC Pipe Cutting Machine:
1. The “Smallest”Model: The workpiece size fitting for this model of machine is up to Φ600mm diameter, and 6000mm length, which is the smallest grade;
2. The “Simplest”Design: With 3 Axis (X/ Y/ Z axis, please check illustration as below) control compared with 5 Axis/ 6 Axis/ 7 Axis, this model of machine for plasma and oxygen fuel pipe cutting has the most “simple” control logic, for straight up and down, forward and backward movement of cutting torch, without tilting and swiveling as in the case of 5 Axis/ 6 Axis/ 7 Axis models;
The 3 Axis Illustration on 3 Axis for pipe cutting, controlled with CNC: (Fig.1)
3. With the “Lowest Quotation”: Conceivably, with the most compact size for workpiece and machine itself, as well as the simplest control logic, this model of machine has the lowest price compared with other specifications and models on CNC control pipe cutting;
4. With the “Longest History”on Application: As introduced in product section of “5 Axis 2500/9 Model Machine”, this model of 3 Axis 600/6 is also the earliest model devised for CNC-CP series CNC Pipe Intersection Cutting Machine, as early as in laboratory stage. In this sense, the model also has “the longest history” in all the models of this machine;
On the other hand, considering the first 3 factors, the other extreme model (With the largest dimension/ the most complicated control/ the highest price) is 7 Axis 3000/12 model machine.
1. Feature: With years of application and continuous improvement, the 3 Axis 600/6 model has mature technology, smooth running and consistent performance, which is a kind of high quality cost effective machine, in the field of plasma and Oxygen fuel pipe cutting;
1) The model of 3 Axis 600/6 specification machine is most applicable for straight edge cutting on small workpieces, with diameter up to Φ600mm, without the necessity of oblique side beveling:
2) The small size pipe product, cut from Wuxi JACK 3 Axis 600/6 CNC Pipe Intersect Cutting Machine: (Fig.2)
3) Why No Slant Edge Beveling: The reason on not need slant beveling in small size machine is, generally speaking, the smaller the diameter of pipe, the thinner of its wall thickness. And for small pipe with thin wall thickness, edge beveling or not does not play such important role as in the case of medium and large size pipe with thicker thickness, which is common seen in 5 Axis/ 6 Axis/ 7 Axis configuration machine;
1) User Friendly Operation: This machine has easy and efficient operation, which boasts high productivity with good and stable quality;
2) Never Outdated Product: For these reasons, with so many years putting into use, this 3 Axis 600/6 Plasma and Oxygen fuel CNC Pipe Cutting Machine is not outdated. Instead, it sees extensive application in infrastructure sites of airport, train station etc. for building pipe and or tubular truss steel structure;
See below picture and attached pictures for application cases of 3 Axis 600/6 model machine: (Fig.3)
Model Technical Parameter | 3 Axis CNC-CP 600/6 Plasma and Oxygen Fuel CNC Pipe Cut Machine |
Suitable Diameter Range of Pipe | 80 ~ 600 (mm) |
Suitable Max. Length of Pipe | 6000 (mm) |
Suitable Thickness of Pipe (mm) | 6~ 100 mm for flame cutting 3 ~ 25mm for plasma cutting |
Suitable Cutting Speed of Flame and Plasma | 200∼ 800mm/min. for flame cutting Around 200~ 2000mm/min. for plasma cutting (Based on thickness of Pipe and Plasma Power) |
CNC Control Axis | 3 Axis of X/ Y/ Z X Axis: Cutting torch positioning along pipe longitudinal; Y Axis: For controlling pipe rotation; Z Axis: Cutting torch along pipe radius |