1) Metal plates in the length range up to 8000mm, and width up to 2500mm, and thickness from 6mm to 100mm;
2) Most majority of the Edge Milling Machine workpieces are carbon steel plates, which are applied in industries of Boiler, Electric Power Plant, Shipbuilding, etc.;
1) XBJ and SXBJ series Sheet Metal Plate Beveling Machine is a kind of important 1st operation equipment, serving as welding preparation unit: Edges of workpiece steel plates will be machined into straight end face, or upper or lower slant edges;
1) As introduced previously, XBJ and SXBJ series Sheet Metal Plate Edge Milling Machine is a kind of large size equipment, processing large size heavy weight steel plates;
2) The traditional way of loading the steel plates into the End Chamfering Machine before edge milling, and taking off after edge milling, is by means of manual pushing and pulling;
3) This is conceivable fairly dangerous and uneasy, not only considering size and weight of steel plate, but also the sharp edges of steel plate that may do harm to operator of Edge Beveling Machine;
2. As its name suggests, this Workpiece Convenient Handling Edge Milling Machine has its workpiece steel plate loaded into and out of the End Milling Machine automatically, by means of hydraulic drive handling system. It is the unique function celled owned by Wuxi JACK for our Edge Beveling Machine;
1) As can be observed from the above photo, this Edge Milling Machine automatic system is composed of several pieces of brackets, with array of rolling rollers installed on its top surface;
2) During preparation period of the Edge Milling Machine, driven with hydraulic oil cylinders, these rolling rollers will revolve, driving the steel plate forward;
3) Upon the steel plate is sent to proper position of the Edge Milling Machine work table, the hydraulic handling system stops running, and the steel plate is positioned by means of inserting plugs on the brackets;
5. The Edge Beveling Machine equipped with such hydraulic automatic handling system can be defined as an advanced configuration Edge Milling Machine;
6. Please check the attached video of this product section to view running of the hydraulic loading system for the Sheet Metal Plate End Chamfering Machine.
1) Hydraulic driving workpiece steel plate loading system: The yellow color frame in the above photo of the SXBJ-8 Plate Beveling Machine;
a) Judging from its installation orientation, you can find that the left one set of milling unit is for making lower edge beveling, while the right one is for making straight edge and upper edge grooving;
3) The milling unit carriage horizontal movement guiding precise linear guiderails and transmission rack: The light green color frame in the above photo of the SXBJ-8 Sheet Metal Plate End Chamfering Machine;
4) The hydraulic oil tubes pipeline: The light purple color frame in the above photo of the SXBJ-8 Sheet Metal Plate Edge Milling Machine.
Below are technical specifications of the SXBJ-8 Double Heads Automatic Sheet Metal Plate End Chamfering Machine:
Model Technical Parameter | Automatic Handling SXBJ-8 Double Heads Sheet Metal Plate Edge Beveling Machine |
Max. Plate Beveling Length | 8000 mm |
Max. Width of Steel Plate | 2500 mm |
Milling Angle of the Edge Milling Machine | 0°~ 80° for straight and upper edge grooving -45°~ 0° for lower edge grooving |
Power and rpm of Milling Head | 7.5 kW, 1440 rpm |
Spindle rpm of Edge Milling Head | 75 ~ 420 r/min., 6 grades by handwheel |
Hydraulic Power Motor | 5.5 kW |
Milling Head Quantity | 2 sets |
Plate Thickness Range for Edge Grooving | 6∼100 mm |
Edge Milling Speed | 130∼1000 mm/min. (VFD, Inverter Control) |
High Speed of Idle | 4000 mm/min. |
Applicable Diameter of Facer Plate | D=Ø125 ~ Ø320mm (Ø200mm For delivery) |
Hydraulic Rated Pressure | 5.5 MPa |
Hydraulic Working Pressure | 3.5 MPa |
Hydraulic System Flowrate | 47 L/min. |
Worktable Width | 450 mm |
Worktable Height | 1050 mm |