1) SXBJ-3 Multi-function Steel Plate Beveling Machine is the smallest model in the product family of XBJ and SXBJ series Steel Plate End Milling Machine;
2) Here, the figure “3” in model “SXBJ-3” means that this Steel Plate End Beveling Equipment has the largest edge milling stroke of 3000mm;
3) Equipped with 2 sets of milling head, the SXBJ-3 Steel Plate End Milling Machine can produce upper and lower edges of any side of workpiece steel plate;
1) Take a look, the SXBJ-3 Steel Plate Edge Milling Machine is “weird”, on the aspect of combination on small size (3m long stroke of metal plate edge milling only) and configuration of double sets of milling heads;
2) For such “short” stroke of SXBJ-3 Steel Plate End Milling Machine, conceivably only one set of milling head is enough for carrying out the plate edge milling operation. Is it necessary to equip 2 sets of milling heads in the Edge Milling Machine with the valid max. stroke range of 3m plate edge milling? The answer is yes;
3) Nowadays in industry of Construction Machinery, Engineering Machinery and other Vehicles Industry, it witnesses more and more application demand on small stroke Steel Plate Edge Milling Machine such as SXBJ-3 or SXBJ-4, which guarantee ideal condition of the best working efficiency and efficient double edges chamfering, this is more and more important in the market of fierce competition on Steel Plate End Milling Machine;
1) Double heads SXBJ-3 3m Steel Plate Edge Milling Machine can make great contribution on this trend and cater to the customer demand;
2) Such Steel Plate Edge Milling Equipment can reduce total cycle time of metal plate edge milling process up to 50%, because top and bottom bevels can be edge milled with one time working stroke in the Edge Milling Machine, by means of coordinating work of 2 pieces of milling heads;
Available for accommodating two sets of milling heads in the working stroke of 3m for SXBJ-3 Steel Plate End Milling Machine:
1) Another concern is whether it is cramped for installing 2 sets of milling heads along the 3000mm valid stroke of the Steel Plate End Beveling Equipment? Be sure, the 3m milling stroke should be guaranteed for fitting the 2 sets of milling heads in the SXBJ-3 Steel Plate Edge Milling Machine;
2) The solution on this lies in exquisite design of the mechanical bed of the SXBJ-3 Steel Plate Beveling Machine. Mechanical machine bed of SXBJ-3 is 3000mm longer than that of the XBJ-3 single head Steel Plate Edge Milling Machine;
3) Today the SXBJ-3 Double heads Steel Plate End Milling Machine is a kind of mature and popular product in the market, in the field of XBJ and SXBJ series Edge Milling Machine;
1) As can be seen from the above photo, in XBJ and SXBJ series Steel Plate Edge Milling Machine, besides general control board of the Edge Milling Equipment, each set of milling head carriage is also equipped with its individual working control board and operating panel. This is convenient for on site put into use of the Steel Plate End Beveling Equipment;
Below are technical specifications of the SXBJ-3 Multi-Function Double Heads Steel Plate Edge Milling Equipment:
Model and Technical Parameter | SXBJ-3 Double Heads Steel Plate End Milling Machine |
Max. Steel Plate Beveling Length | 3,000 mm |
Power and rpm of Milling Head | 7.5 kW, 1440 rpm |
Spindle rpm of Edge Milling Head | 75 ~ 420 r/min., 6 grades by handwheel |
Hydraulic Power Motor | 5.5 kW |
Milling Head Quantity | 2 sets |
Plate Thickness for Sheet Metal Chamfering | 6∼50 mm |
Milling Angle of Top Edge Milling Unit | 0° to +60° |
Milling Angle of Bottom Edge Milling Unit | -45° to 0° |
Edge Milling Speed of Edge Milling Machine | 130∼1000 mm/min. (VFD, Inverter Control) |
High Speed of Idle | 4000 mm/min. |
Applicable Diameter of Facer Plate | D=Ø125 ~ Ø320mm (Ø200 For delivery) |
Quantity of Hydraulic Jacks | 9 pieces |
Hydraulic Rated Pressure | 5.5 MPa |
Hydraulic Working Pressure | 3.5 MPa |
Hydraulic System Flowrate | 47 L/min. |
Worktable Width | 450 mm |