1. The XBJ-15 General Purpose Plate Beveling Machine is one of the common used specifications in product family of End Milling Machine;
2. Equipped with one set of 7.5kW milling head, this long stroke Large Plate Edge Milling Machine can have edge milling on metal plate with max. 15m length, and 50mm thickness.
1. The General Purpose Sheet Metal Edge Milling Machine is kind of high precision machining equipment. To main the high standard delivery of this Plate Beveling Machine, there exist certain demand on its working environment;
1) There should be free of explosive or corruptive gas, steam, rain water, chemical deposition that may harm normal operation of the general purpose Plate Edge Milling Machine;
2) Ambient temperature: -10℃~40℃
3) Relative humidity: Max. monthly average relative humidity is 90%
4) Power: Voltage fluctuation (for rated frequency) ≤±10%
5) Frequency fluctuation (for rated voltage): ≤±2%
3. The above listed demands are for the purpose of protection on milling head/ electric system/ hydraulic system, and mechanical frame of the XBJ series Edge Milling Machine.
2. Source: Milling head driving facer blade is the central execution unit of the Plate End Milling Machine. It is the core outsourced unit, purchased by Wuxi JACK from professional supplier with long history and high standing reputation in the industry;
3. Pictures of the milling head adopted in this Plate Edge Milling Machine please check attached and below:
1) For its spindle revolving speed, there are 6 grades to select, and made adjusted by means of easily turning the handwheels. Please check the photo as below:
a) Up and Down: To adapt to varying thickness of the metal plate to be edge milled in the Sheet Metal Edge Milling Machine, this milling head can be elevated vertically under motor drive;
b) Feeding and Retreat: Its forward and backward of milling facer blade, which is installed on the front end of milling head, before official running of Plate End Milling Machine, can be either pushed forward and pulled back by turning handwheel, or with motor drive;
c) Milling Angle Management: Adjust swing angle of the milling facer blade, which determines finished milling angle. This is one of critical technical index of Plate Edge Milling Machine. This also can be either manipulated manually, or with motor drive. It has metal dial ruler for indicating milling angle of the Plate Edge Beveling Machine;
3) In these ways, the milling head of Edge Milling Machine can have its position adjusted in comprehensive manner, getting the largest degree of freedom and flexibility, for the purpose producing the best quality of sheet metal grooving making from Edge Beveling Machine.
Below are technical parameters of XBJ-15 Sheet Metal Edge Beveling Machine:
XBJ-15 Large Sheet Metal Edge Milling Machine | ||||
No. | Parameters | Value | Note | |
1 | Max. Length of Plate Machined One Pass | 15000mm | ||
2 | Plate Thickness | 6 ~ 50mm | Can be special made | |
3 | Milling Angle | Top Milling Unit | 0°∼+45° | 1 set of milling unit |
4 | Power and rpm of Milling Head | 7.5kW, 1440r/min | ||
5 | Diameter of Facer Blade | D=Ø125-Ø320mm | Ø200 Facer unit by default | |
6 | Spindle rpm | 75-420r/min | 6 grades by hand wheel | |
7 | Spindle Stroke | 100mm | ||
8 | Milling Speed | 150 ~ 1,000 mm/min | VFD | |
9 | Milling Motor Power | 2.2kW | Inverter motor | |
10 | Idle Speed | 4m/min. | ||
11 | Hydraulic Power | 5.5kW | ||
12 | Hydraulic Jack | 15 sets | ||
13 | Jack Screw | 25 sets | Intermittently installed | |
14 | Workpiece Rack | 1 set | ||
15 | Machine Power System | 380V\50Hz\AC 3P | On customer demand | |