1. Overall Dimension:
As can be seen from the attached photos, this model 5 Axis 1400/6 has the shortest length in product group of CP series Oxygen fuel and Plasma CNC Pipe Cutting Machine. For small to medium diameter of Φ1400mm grade, this length has wide application;
1) The 5 Axis control (X/ Y/ Z/ A/ B) makes the high efficiency pipe cutting operation fulfilling the tasks of straight edge cutting and slant edge beveling within one time operation:
2) The cut off working parts from Wuxi JACK 5 Axis 1400/6 CNC Pipe Cutting Machine: (Fig.1)
3) The cutting torch 5 degree of freedom (5 axis) indication on pipe cutting: (Fig.2)
3. Thermal Cutting Method:
1) As discussed in product section of 6 Axis 1400/6 model, plasma cutting, which focus on slag free cutting on small to medium thickness pipes, is more applicable for the specification grade of Φ1400mm, than large models on pipe cutting (Φ2000mm ~ Φ3000mm);
2) Besides, oxygen fuel flame cutting is also widely used;
1) This is utilized with friction roller group, which holds and revolves pipe during cutting and beveling step in pipe cutting: (Fig.3)
2) In all, the 5 Axis automatic flame and plasma model is a practical solution for customers, who need to have cutting kerf and slant bevel on pipe edge and body, for the convenience of subsequent welding and assembly. This model of 5 Axis can be renewed to more sophisticated level model (6 Axis for Φ1400mm diameter, and 7 Axis for Φ2000mm diameter and above) with great ease.
1. Industrial computer (CNC) CPU of CNC Pipe Intersection Cutting Machine has modular structure, easy and convenient for expansion and update when necessary;
2. CPU of CNC controller is similar to that of the 7 Axis. The difference is: The CPU in 5 Axis model machine utilizes 2 less motion control cards than that of the 7 Axis model, which are used for controlling V Axis and W Axis (Cutting torch and friction rollers transverse movement) for 7 Axis pipe cutting job;
3. Software Operating System is also the similar between 5 Axis and 7 Axis models machine, and so is workpiece library embedded within the CNC. There exists slight variation in HMI (Human Machine Interface) of the software between 5 Axis and 7 Axis models, but same in hardware;
The HMI (Human machine interface) on pipe size input, in Wuxi JACK 5 Axis Oxygen fuel and Plasma CNC Pipe Cutting Machine: (Fig.4)
4. In general, the background program in CP series CNC Pipe Cutting Machine is compiled with structured language, which is available for future program upgrade without much effort, as well as possible 5 Axis expansion into 7 Axis.
Model Technical Parameter | 5 Axis CNC-CP 1400/6 High Efficiency Oxygen Fuel and Plasma CNC Pipe Intersection Cutting Machine |
Applicable Workpiece Diameter Range | 300 ~ 1400 (mm) |
Applicable Max. Length of Workpiece | 6000 (mm) |
Applicable Workpiece Thickness Range | 6~ 100 mm for flame cutting; 3 ~ 25mm for plasma cutting |
Applicable Thermal Gas Cutting Speed | 200∼ 800mm/min. for flame cutting Around 200~ 2000mm/min. for plasma cutting (Based on thickness of Pipe and Plasma Power) |
CNC Control Axis | 5 Axis of X/ Y/ Z/ A/ B X Axis: For cutting torch movement along pipe longitudinal direction; Y Axis: For controlling pipe CW/CCW rotation; Z Axis: For managing cutting torch elevation; A Axis: For tilting cutting torch along pipe radius; B Axis: For tilting cutting torch along pipe longitudinal direction |