1) DX0820 (Shown in the first ~ fifth photos) is the shortest size of Welding Structure Member End Face Milling Machine;
2) Considering in DX series H Beam End Face Milling Machine, height is much important than length, DX08xx can be viewed as the smallest model of its type: Special size Small H Beam End Face Milling Machine;
3) For shorter vertical stroke less than 800mm, it is no sense to produce such smaller machine. The smaller workpiece can be end faced with the model of DX08xx H Beam End Face Milling Machine.
1) DX08xx Small H Beam End Face Milling Machine usually is used in Machinery Plant, serving as small milling equipment for section steels/ mechanical components, etc.;
2) Such DX08xx small Welding Structure H Beam End Face Milling Machine has large processing range, applicable for end facing on metal components such as casting/ steel parts. So, this model of equipment is widely used in Machinery Manufacturing, especially applied to Mold Industry/ Mold Base Frame production, as well as both sides end face milling and drilling on long length workpieces;
3) This DX08xx small size I Beam End Face Milling Machine can implement milling on workpiece plane, chamfering trapezoidal surface and T slot. Equipped with hydraulic, electric or other types of workpieces securing fixture, both ends of long parts can be milled/ drilled/ special surface machined.
Equipped with 7.5kW spindle revolution adjustable milling head,
1) Capability: Powerful and flexible milling force, together with high precision machining finished surface, which can meet the demand on various machining requirement on mechanical metal parts; Multifunction use of the H Beam End Face Milling Machine;
2) Operation: Friendly and simple use; Low running noise; Continuous adjustable end facing speed because of A.C. inverter, for adjusting working speed of the H Beam End Face Milling Machine precisely;
3) Daily Service: High rigidity durable machine body, easy maintenance;
4) In all, the entire set of DX08xx Steel Structure H Beam End Face Milling Machine is a kind of ideal equipment for machining in Machinery Industry.
1) With decrease on end facing stroke and machine size, what is special and common ground of this DX08xx Welding Structure Member H Beam End Face Milling Machine with remaining larger size of same equipment?
a) Column is straight square column, as shown in the attached photos, instead of the varying section size column in larger models of machine. For example, please check the product section of “DX3030 Casting Base H Beam End Face Milling Machine”;
b) Sometimes milling head vertical drive is by means of manual turning handwheel, as the white color DX08xx small Welding Structure End Face Milling Machine in the attached photos. Of course, it can be made with motor drive;
c) Most of machining jobs are performed in horizontal direction--- In this respect, the DX08xx has certain similarity with XBJ series Edge Milling Machine;
d) Workpiece fixture can be made with the type other than hydraulic clamping bracket in larger models of Welding Structure Member H Beam End Face Milling Machine. The most common seen for DX08xx is special made worktable, as shown in the 4th photo. Or screw tightening type fixture;
The entire machine structure (Especially base bed) and working principle/ control system/ milling head of DX08xx H Beam End Face Milling Machine are same as other larger models of the equipment group.
For this DX08xx small Welding Structure End Face Milling Machine (H Beam End Face Milling Machine):
No. | Parameter | Special Made Small Size DX0820 Welding Structure Member Face Milling Machine | |
1 | Fitting Biggest Workpiece Cross Section Size Height × Width= | 0.8×2 m | |
2 | Horizontal End Face Milling Speed | 150~800 mm/min | Working speed, Inverter control |
3 | Face millinging Carriage Idle speed in horizontal and vertical direction | 1200 mm/min | Fixed speed |
4 | Vertical End Face Milling Speed | 150~800 mm/min, Fixed or variable | Motor drive or hand-made; For motor drive, with or without inverter |
5 | Horizontal Driving Motor | 2.2 kW | Variable frequnecy motor |
6 | Horizontal and Vertical End Facing Guiding | With Heavy duty Precise Linear Guiderail, assembled onto machine base bed and column | |
7 | Vertical Driving Motor | 1.5kW or no | |
8 | Milling Head Power | 7.5 kW | Made in Chinese mainland |
9 | Milling Head Spindle Revolution | 75~420 rpm | 6-grade Revolution adjustable |
10 | Diameter of Facing Cutter | Ø125~250 mm | Ø 200 equipped with machine |
11 | Milling Head Spindle Stroke | L=100 mm | |
12 | Workpiece Rack (Optional) | 1 set | Special made worktable, or screw tightening fixture |
13 | Electricity Power Specification | 3P AC380V,50Hz,15kW for China mainland |