PHJ series and ZHJ series H Beam Assembly Weld Straighten Integral Machine, the other name is 3 in 1 H Beam Fabrication Machine, is one of the best selling product group of Wuxi JACK Technology.
1) Application: H Beam Fabrication Machine was originated around the year of 2000. The intension on developing this automatic vertical H Beam Welder was to replacing H Beam Production line, especially H Beam Assembly Machine, and H Beam Welding Machine and H Beam Straightening Machine with single set equipment of H Beam Assembly Weld Straighten Integral Machine. Due to certain technical difficulties that could not be surmounted, it was kept as “laboratory product" for many years;
2) Originated by Wuxi JACK Technology: In 2009, we are the 1st producer in China to push PHJ series of 3 in 1 H Beam Fabrication Machine from concept design to mature application, and put it into market;
3) Ever since, it gained more and more customer applause both in China and Overseas market;
4) At the same time, we keep on Continuous Improvement on design and manufacturing of these PHJ and ZHJ series of Fit Up Full H Beam Fabrication Machine, based on experience accumulation and feedback from customers;
5) Broad Customer Base: Today, the product family of PHJ and ZHJ series 3 in 1 H Beam Assembly Weld Straighten Integral Machine has become one of the key products of our company, and taken priority market share in China, Russia, Southeast Asia and Central Asia.
1) 3 Functions in 1: This machine family of H Beam Assembly Welding Straightening Machine integrates 3 key functions of H Beam Assembly/ CO2 GMAW or SAW Welding and flange Straighten, making the original three machines (H Beam Assembly/ Weld/ Straightening) into single set of automatic pull through H Beam Welder;
2) Land Space Saving: Besides, this multifunction H Beam Welding Machine (H Beam Fabrication Machine) removes floor space and operation for conveying H Beam among the above mentioned machines;
3) Greatly Saving Cost: In this way, not only can this H Beam Assembly Weld Straighten Integral Machine deliver high quality welding H Beam, but also reduces investment on equipment and facility floor space, and improves productivity effectively;
4) Labor Cost Reduction: Also, operator of this automatic vertical H Beam Welder (H Beam Assembly Welding Straightening Machine) is reduced from original six people for the above mentioned three machines (H Beam Assembly/ Weld/ Straightening) to two operators for this 3 in 1 H Beam Fabrication Machine;
5) The Largest Selling Volume Model: PHJ15 Fit Up Full H Beam Fabrication Machine is the most frequent selected model of its product family. This model of H Beam Assembly Welding Straightening Machine is for making welding H Beam of web height less than 1500mm, of both symmetric and or asymmetric flange position with respect to web. (See attached picture).
Below are primary technical specifications of PHJ15 model 3 in 1 H Beam Assembly Weld Straighten Integral Machine:
Technical Parameter | PHJ15 Model 3 in 1 H Beam Fabrication Machine |
Web Height | 200 ∼ 1500 mm |
Web Thickness | 5 ∼ 30 mm |
Flange Width | 200 ∼ 800 mm |
Flange Thickness | 6 ∼ 40 mm |
Finished Workpiece Length | 3000 ∼ 15000mm |
Speed of Assembly/ Welding/ Straightening | 200∼1200 mm/min.(VFD) |
Single Pass Welding Seam Height | 8~12 mm |
Machine size(L×W×H) | 28m × 4m × 4.6m |