YTJ-60 Hydraulic Vertical High Power H Beam Straightening Machine
Home » Products » H Beam Straightening machine » YTJ-60 Hydraulic Vertical High Power H Beam Straightening Machine
Share to:

YTJ-60 Hydraulic Vertical High Power H Beam Straightening Machine

Quantity:

The YTJ-60 (and YTJ-80) are heavy duty of YTJ-series hydraulic high power H Beam straighten equipment.  

 

To be specific, YTJ-series hydraulic high power I Beam straightening machine (same name as H Beam) can be divided into 2 groups of light& medium duty YTJ-40&50, and heavy duty YTJ-60& 80, on the aspect of:

  1) Straightening principle different;

  2) Hence machine structure;

  3) Hence operating process (Operation panel)

 

  1) Straightening principle of YTJ-60(And YTJ-80) hydraulic high power I Beam straightening machine:

      Please check below sketch and make compare with that of YTJ-40&50:

 Straightening principle- YTJ60 and 80

     - As can be seen from above, with the same kind of T-cavity formed with 2 pieces of top straightening rollers

       and 1 piece of bottom straightening roller, for YTJ60&80 high power I Beam straighten machine, working style

       is bottom straightening roller moving upward and exerting force on bottom of the flange tightly, while the 2 

      top rollers kept at static along vertical direction. This is contrary to that of YTJ-40&50, as well as mechanical

      HYJ-series;

    - Same as YTJ-40&50 high power I Beam straighten equipment, the driving power on bottom straightening 

      roller is from hydraulic cylinder, with higher power and hence greater driving force;

   - Also contrary with YTJ-40&50 hydraulic high power I Beam straighten machine, transport of H Beam on the 

    conveyors is made with revolve of the 2 pieces of top straightening rollers, instead of the bottom roller as in

    YTJ-40&50;

  2) Machine Structureof YTJ-60(And YTJ-80) hydraulic high power I Beam straightening equipment (same as H

     Beam), which is different from YTJ-40&50, is its span adjustment unit for the 2 top straightening rollers. Please

    check below picture:

 

 11- 60&80 翼板对中调节油缸

  For accommodating flange of various size, it is necessary to adjust relative position of the 2 top straightening 

  rollers. And movement of the rollers is driven with oil cylinder within guiding bush; It is different from YTJ-40&50

  (also mechanical H Beam straightening machine), that this is made with handwheel along a T-slot;

  3) Operating process (Operation panel) of YTJ-60 &80 hydraulic high power I Beam straighten equipment 

    (Same meaning as H Beam):

      With both the top straightening rollers and web clamp unit are all driven with hydraulic cylinder, instead of 

      mechanical lead-screw by means of hand-wheel, operation of the machine integrates corresponding buttons

      for fulfilling these tasks (Please check attached picture on operating panel. It is in Chinese. For specific 

      meaning and usage of each button see introduction on YTJ-80 hydraulic high power I Beam straightening

      equipment)

  

 Below are specifications of this YTJ-60 Hydraulic High Efficiency H Beam Straightening Machine:


PARAMETER

Specification

NOTE

Model

YTJ-60

Straightening Power

Hydraulic Pump station

H Beam Material

Q345

Tensile strength 510~600MPa

Flange Thickness (s) (mm)

6 ~ 60

Special-made available

Flange Width (b) (mm)

200 ~ 800

Web Thickness (a) (mm)

≤60

Web Height (h) (mm)

200-1500

H Beam Length (mm)

4000 ~ 12000


Straighten Speed (mm/min)

≈6300


Main Motor Power (kW)

18.5


Hydraulic Station Power (kW)

11


Power Supply

3P 380V for  China

Can be made on country of   customer

 


Home

WUXI AMASS MACHINERY CO., LTD
WUXI JACK TECHNOLOGY CO., LTD
0510-83297829
English Language: 15852755799; 
Chinese Language: 13621515089
No. 2, Ouyang Road, Runyang Village, Yang City, Luoshe Town, Huishan District, Wuxi City
© Wuxi AMASS Machinery Co., Ltd  2021 All Rights Reserved.

CONTACT US