YTJ-50 Hydraulic Vertical High Efficiency H Beam Straightening Machine
Home » Products » H Beam Straightening machine » YTJ-50 Hydraulic Vertical High Efficiency H Beam Straightening Machine
Share to:

YTJ-50 Hydraulic Vertical High Efficiency H Beam Straightening Machine

Quantity:

YTJ-50 is the middle model of YTJ-series hydraulic high efficiency H Beam straightening machine, and also the often-used type.

 

Description on this automatic H Beam straighten equipment:

  1) YTJ-50 has the same straightening principle as YTJ-40 (Note: YTJ-40&50 has similar straightening principle as

      HYJ-series mechanical H Beam straighten equipment. The difference lies in driving power source of top 

     straightening rollers, one is hydraulic pump station and one is mechanical motor reducer);

  2) Main units of the machine:

    - Machine main frame and base;

    - Front side and rear side conveyor;

    - Straightening roller unit (2 pieces of top rollers and 1 piece of bottom roller);

    - Hydraulic station;

    - Hydraulic oil cylinders for pressing top straightening rollers downward;

    - Bottom transmission unit;

   -  Motor reducer;

   - Web clamp unit (2 pairs of aligning rollers at front and back side of the main frame each);

   - Control board and operation station

  3) Main transmission system of this YTJ-50 (YTJ-40 also) high efficiency H Beam straightening equipment is 

     adopted with 15KW motor and driven with gear speed reducer, of high transmission efficiency and rapid 

     straightening speed (9m/min.);

  4) Operation of this high speed H Beam straighten equipment:

     - Control board is put on the ground, away from the main frame;

     - For convenient operation, operating panel is installed on the main frame close to T-cavity straightening

       section;

    - Operating panel of YTJ40&50 see below picture (due to different straightening principle,operating panel of

      YTJ-60&80 is different from YTJ-40&50)

 40& 50 Operating Panel

  5) Usage of buttons on operating panel of YTJ40&50 high efficiency H Beam straighten equipment:

     - The left section of the panel, “ELEVATION CONTROL”, is for controlling hydraulic system and vertical

       movement of the 2 pieces of top straightening rollers (Hence straightening process);

     - The right section of the panel, “MAIN MOTOR CONTROL”, is for managing machine power and its conveyor;

     - So, for the left section, “OIL-PUMP ON” and “OIL-PUMP OFF” are for starting on and shut off hydraulic

       station of this high power H Beam straighten equipment;

     - "LEFT UP”, “LEFT DOWN”, “RIGHT UP”, “RIGHT DOWN”, “ALL UP”, “ALL DOWN” refer to 

        manipulating on vertical movement of the 2 pieces of top straightening rollers (Hence straightening process);

     - For the right section, “FORWARD”, “BACKWARD”, “FORWARD JOG”, “BACKWARD JOG” are for 

       controlling conveyor movement in continuous and inching mode respectively, in both directions. In this way,

       H Beam feeding in and send out of this hydraulic H Beam straighten equipment is managed; “STOP” is for

       making the conveyors at standstill;

     - E-emergency STOP button is for contingency management of this hydraulic H Beam straighten equipment

 

Below are specifications of this YTJ-50 Hydraulic High Precision H Beam Straighten Equipment:

PARAMETER

Specification

NOTE

Model

YTJ-50

Straightening Power

Hydraulic   Pump station

H Beam Material

Q345

Tensile strength 510~600MPa

Flange Thickness (s) (mm)

6 ~ 50

Special-made available

Flange Width (b) (mm)

200 ~ 800

Web Thickness (a) (mm)

≤40

Web Height (h) (mm)

200-1500

H Beam Length (mm)

4000 ~ 12000


Straighten Speed (mm/min)

≈9000


Main Motor Power (kW)

15


Hydraulic Station Power (kW)

5.5


Power Supply

3P 380V for   China

Can be made on country of   customer

 


Home

WUXI AMASS MACHINERY CO., LTD
WUXI JACK TECHNOLOGY CO., LTD
0510-83297829
English Language: 15852755799; 
Chinese Language: 13621515089
No. 2, Ouyang Road, Runyang Village, Yang City, Luoshe Town, Huishan District, Wuxi City
© Wuxi AMASS Machinery Co., Ltd  2021 All Rights Reserved.

CONTACT US