What are the characteristics of CNC plate flame cutting machines?
Home » H Beam Fabrication Machine » Product News » What are the characteristics of CNC plate flame cutting machines?

What are the characteristics of CNC plate flame cutting machines?

Views:0     Author:Site Editor     Publish Time: 2021-09-04      Origin:Site

What are the characteristics of CNC plate flame cutting machines?

CNC plate flame cutting machine makes use of a digital program to drive the movement of an equipment device, is geared up with a flame cutting system, as well as utilizes a numerical control system to control the switch of the fire reducing the system to cut steel products such as steel plates. This mechatronics cutting device is a CNC plate flame cutting machine. The CNC plate flame cutting machine can be split into 3 components: CNC system, fire reducing system, and also drive system. The manufacturing of different suppliers is roughly the very same.

 

l CNC plate flame cutting machine cutting ability:

l Advantages of CNC plate flame cutting machine cutting:

 

CNC plate flame cutting machine cutting ability:

The CNC plate flame cutting machine has the ability to cut huge thickness carbon steel, and the cutting cost is low, however there are huge reducing deformations, low reducing accuracy, reduced reducing rate, long cutting preheating time, long piercing time, and it is challenging to adapt to fully automated operation needs. Its application is mostly restricted to the cutting of carbon steel and also large density plates, and will slowly be replaced by plasma cutting in the cutting of medium and also thin carbon steel plates.

 

Advantages of CNC plate flame cutting machine cutting:

The CNC plate flame cutting machine integrates the traditional fire reducing technique with CNC automation technology, and also can be made use of for the cutting of carbon plates and regular carbon plates with a thickness of 6mm or more. Considering making use of steel in the domestic market, CNC fire cutting still inhabits a larger market. The cutting approach of the CNC plate flame cutting machine is various from the cutting approach of the CNC plasma cutting device. The flame cutting is a cutting method that utilizes a heat flame to heat a specific factor on the surface of the steel plate to the ignition factor and also fill it with high pressure oxygen to make it shed to develop an incision.

Normally, gas and also oxygen is required for fire cutting, and there are three types of gas offered for fire: coal gas, gas, and also acetylene. Amongst them, gas has the tiniest calorific worth, complied with by gas as well as acetylene has the largest calorific worth. The better the heat, the faster the cutting and also the quicker the burning rate, the much better the reducing result.

Flame cutting can only cut metals that are quickly oxidized. Flames with higher carbon content are tough to reduce. The density of fire cutting is typically carbon steel with a density of 6mm or even more. Although it can likewise be cut for plates with a density of less than 6mm, due to the fact that the plate is thin, the method of fire cutting is to utilize a high-temperature fire to heat a particular point externally of the steel plate to the ignition factor and also charge it. A cutting approach that uses high-pressure oxygen to shed it to create a cut.

 

For that reason, it is very easy to trigger thermal deformation of the plate when cutting home plate, and the cut plate cannot accomplish great results. Normally, the fire CNC reducing device can reduce to 200mm, and also after special adjustment, it can cut 350mm.

In terms of reducing speed, CNC fire cutting is lot of times quicker than manual cutting. However, it is slightly slower than plasma cutting. Utilize a 20mm thick sheet for comparison. The flame cutting rate has to do with 450mm/min per minute, as well as the plasma cutting rate is about 1500mm/min per minute. In terms of reducing impact, the perpendicularity of flame cutting is far better than that of plasma cutting. The cutting surface of flame cutting is vertical as well as the cutting surface area of plasma cutting has a specific inclination.

 


Home

WUXI AMASS MACHINERY CO., LTD
WUXI JACK TECHNOLOGY CO., LTD
0510-83297829
English Language: 15852755799; 
Chinese Language: 13621515089
No. 2, Ouyang Road, Luoshe Town, Wuxi City, Jiangsu Province, China

CONTACT US
© Wuxi AMASS Machinery Co., Ltd  2021 All Rights Reserved.
备案证书号:苏ICP备13045244号-1