Availability: | |
---|---|
Quantity: | |
We give the description “Special made” to the SXBJ-15 Double Heads Plate End Chamfering Machine of this product section, because the 2 sets of milling units are assembled in different style from conventional double heads Steel Plate Edge Beveling Machine;
As can be observed from the attached first photo and blow, in this special made Edge Milling Machine, the installation position of the two milling carriages is:
1) There is one set of milling head carriage each, installed at both sides of the End Milling Equipment mechanical bed, or working table;
2) In other words, the 2 sets of milling head will work face to face during operation of the Edge Milling Machine. Please check below picture:
3) As comparison, the standard, or conventional XBJ and SXBJ series double heads Sheet Metal Steel Plate Edge Milling Machine has both its two sets of milling carriages installed at the same side of End Milling Equipment mechanical machine bed. Shown as below:
1) This is a set of custom made Sheet Metal Plate Edge Milling Machine for a customer in Vietnam. Please check attached video to view on its operation at customer facility;
2) Such special made Steel Plate End Beveling Machine is for implementing steel plate edge milling on both sides of the narrow workpieces: Width size of workpieces is in the scope of 500~600 mm. Such size is approximately close to worktable depth of the Special Made Steel Plate Edge Milling Machine;
1) One side of the milling carriage should be driven to the terminal of End Milling Equipment working table;
2) This is for the purpose of leaving sufficient space for fitting on the front extension bracket loading and unloading unit, at the front side of the SXBJ-15 Steel Plate Edge Milling Machine;
1) One time stroke of metal plate edge milling on both sides of the narrow width workpiece simultaneously;
2) One time metal plate edge milling on “normal width” workpiece, for making either top bevels or bottom bevels welding groove. Here please note that, different milling head takes on tasks of top or bottom bevels respectively in the Edge Milling Machine;
3)Here, “Normal width” refers to max. width of 3000mm in the Steel Plate Edge Beveling Machine;
To fulfil the abovementioned designated request from customer, Wuxi JACK engineering team has made successful major adjustment on structure and size of the SXBJ-15 special made Edge Milling Machine as below:
1. Both sides of the Steel Plate End Beveling Machine bed are installed with motorized moving base for milling head carriage, instead of installed at only one side, as in the case of conventional Edge Milling Machine;
2. Also for the top and bottom double tiers of milling head carriage horizontal guiding rails, each side of the mechanical base bed are same as standard Steel Plate End Chamfering Machine;
3. The extended terminals at both lateral sides of the Edge Milling Machine mechanical base bed are for installing milling carriages;
4. For this reason, this special made Steel Plate End Beveling Machine has enlarged overall dimension in both its length and depth;
Below are technical specifications of this special made SXBJ-15 Double Heads Special Made Steel Plate End Chamfering Machine:
Model Technical Parameter | SXBJ-15 Double Heads Special Made Steel Plate End Beveling Machine |
Steel Plate Max. Edge Milling Length | 15,000 mm |
Steel Plate Max. Edge Milling Width | 3,000 mm |
Applicable Width Scope of Double Sides Edge Milling | 400 mm ~ 1,000 mm |
Milling Head Quantity and Installation | 2 sets, installed at both sides of machine bed |
Steel Plate Thickness Range for Edge Chamfering | 6∼60 mm (Based on customer demand) |
Milling Angle Range of Top Milling Unit | 0° to +60° |
Quantity of Hydraulic Drive Pressing Jacks | 26 pieces |
Power and rpm of Milling Head | 7.5 kW, 1440 rpm |
Spindle rpm of Edge Milling Head | 75 ~ 420 r/min., 6 grades by handwheel |
Hydraulic Power Motor | 5.5 kW |
Milling Unit Feeding Motor | 2.2 kW |
Edge Milling Working Speed | 130∼1000 mm/min. (Variable Frequency Drive) |
Idle High Speed of Milling Head Carriage | 4000 mm/min. |
Applicable Diameter of Facer Plate | D=Ø125 ~ Ø320mm (Ø200mm For delivery) |
Worktable Width | 550 mm |
Worktable Height | 1050 mm |
We give the description “Special made” to the SXBJ-15 Double Heads Plate End Chamfering Machine of this product section, because the 2 sets of milling units are assembled in different style from conventional double heads Steel Plate Edge Beveling Machine;
As can be observed from the attached first photo and blow, in this special made Edge Milling Machine, the installation position of the two milling carriages is:
1) There is one set of milling head carriage each, installed at both sides of the End Milling Equipment mechanical bed, or working table;
2) In other words, the 2 sets of milling head will work face to face during operation of the Edge Milling Machine. Please check below picture:
3) As comparison, the standard, or conventional XBJ and SXBJ series double heads Sheet Metal Steel Plate Edge Milling Machine has both its two sets of milling carriages installed at the same side of End Milling Equipment mechanical machine bed. Shown as below:
1) This is a set of custom made Sheet Metal Plate Edge Milling Machine for a customer in Vietnam. Please check attached video to view on its operation at customer facility;
2) Such special made Steel Plate End Beveling Machine is for implementing steel plate edge milling on both sides of the narrow workpieces: Width size of workpieces is in the scope of 500~600 mm. Such size is approximately close to worktable depth of the Special Made Steel Plate Edge Milling Machine;
1) One side of the milling carriage should be driven to the terminal of End Milling Equipment working table;
2) This is for the purpose of leaving sufficient space for fitting on the front extension bracket loading and unloading unit, at the front side of the SXBJ-15 Steel Plate Edge Milling Machine;
1) One time stroke of metal plate edge milling on both sides of the narrow width workpiece simultaneously;
2) One time metal plate edge milling on “normal width” workpiece, for making either top bevels or bottom bevels welding groove. Here please note that, different milling head takes on tasks of top or bottom bevels respectively in the Edge Milling Machine;
3)Here, “Normal width” refers to max. width of 3000mm in the Steel Plate Edge Beveling Machine;
To fulfil the abovementioned designated request from customer, Wuxi JACK engineering team has made successful major adjustment on structure and size of the SXBJ-15 special made Edge Milling Machine as below:
1. Both sides of the Steel Plate End Beveling Machine bed are installed with motorized moving base for milling head carriage, instead of installed at only one side, as in the case of conventional Edge Milling Machine;
2. Also for the top and bottom double tiers of milling head carriage horizontal guiding rails, each side of the mechanical base bed are same as standard Steel Plate End Chamfering Machine;
3. The extended terminals at both lateral sides of the Edge Milling Machine mechanical base bed are for installing milling carriages;
4. For this reason, this special made Steel Plate End Beveling Machine has enlarged overall dimension in both its length and depth;
Below are technical specifications of this special made SXBJ-15 Double Heads Special Made Steel Plate End Chamfering Machine:
Model Technical Parameter | SXBJ-15 Double Heads Special Made Steel Plate End Beveling Machine |
Steel Plate Max. Edge Milling Length | 15,000 mm |
Steel Plate Max. Edge Milling Width | 3,000 mm |
Applicable Width Scope of Double Sides Edge Milling | 400 mm ~ 1,000 mm |
Milling Head Quantity and Installation | 2 sets, installed at both sides of machine bed |
Steel Plate Thickness Range for Edge Chamfering | 6∼60 mm (Based on customer demand) |
Milling Angle Range of Top Milling Unit | 0° to +60° |
Quantity of Hydraulic Drive Pressing Jacks | 26 pieces |
Power and rpm of Milling Head | 7.5 kW, 1440 rpm |
Spindle rpm of Edge Milling Head | 75 ~ 420 r/min., 6 grades by handwheel |
Hydraulic Power Motor | 5.5 kW |
Milling Unit Feeding Motor | 2.2 kW |
Edge Milling Working Speed | 130∼1000 mm/min. (Variable Frequency Drive) |
Idle High Speed of Milling Head Carriage | 4000 mm/min. |
Applicable Diameter of Facer Plate | D=Ø125 ~ Ø320mm (Ø200mm For delivery) |
Worktable Width | 550 mm |
Worktable Height | 1050 mm |