RH-2000 Hydraulic Gantry Type Plate Edge Rounding Machine for Dockyard
Home » Products » Edge Rounding Machine » RH-2000 Hydraulic Gantry Type Plate Edge Rounding Machine for Dockyard
Share to:

RH-2000 Hydraulic Gantry Type Plate Edge Rounding Machine for Dockyard

Quantity:

Product name of this RH2000 Edge Deburring and Rounding machine for dockyard implies the two most conspicuous traits of the equipment:

   1) This Edge Rounding machine is generally hydraulic drive;

   2) This Edge Rounding machine has main body of gantry frame structure.

 

We will introduce this Plate Edge Trimming machine from the above two points.

    1. Hydraulic system of RH2000 Automatic Strip Plate Edge Rounding machine:

    1) Hydraulic drive, for majority of its movements, action and positioning operations:


    a) Rounding rollers travel up and down for various thickness of workpiece;

    b) Inching adjustment of rounding rollers along horizontal direction to compensate for oblique side of 

       workpiece;

    c) Vertical movement of downward pressing rollers for keep flatness of workpiece during rounding;

    d) Acting of side fending rollers at input conveyor for positioning of workpiece;

   

2) Accordingly, there are 13 pieces of oil cylinder in total in one set of RH2000 Edge Trimming equipment; And

    all these cylinders are controlled with the same hydraulic station by means of different valves;

    3) Deployment of oil cylinders:

      Please check attached picture:

    a) There are left and right totally 4 sets of oil cylinder for driving the 2 pieces of top rounding rollers along 

       vertical axis at left and right side each;

    b)There are left and right 2 sets of oil cylinders for inching adjustment of rounding rollers along transverse way;

    c) There are 3 sets of oil cylinders at overhead cross-beam of machine body, for driving the 3 pieces of 

      downstroke pressing rollers up and down;

   d) There are left and right, at incoming side and outgoing side of the machine respectively, totally 4 sets of oil

      cylinder for driving the side fend rollers which are used for positioning and clamping of the workpiece;

     These four sections of oil cylinders are in one-to-one correspondence with the four types of movement 

     mentioned in item 1);

  4) The hydraulic system of this high precision End Plate Trimming machine has total power of 4kW, normal 

    pressure of 7MPa and Max. pressure of 12~14MPa. For its daily maintenance and service, we give detailed 

    introduction in machine manual book, and will give training to working staff at customer site.

 

    2. Frame of RH2000 Gantry type Plate Edge deburring and Rounding machine:

    1) The gantry frame gives machine a steady and firm main body, withstanding impact & influence from all the

        high speed and high power working process of rounding;

    2) The gantry frame gives machine a relatively enclosed working environment, protecting both operators and

       working units against external interferences;

    3) The gantry frame gives machine a plain and concise cable/pipeline/tubes routing by way of its columns and

      cross beams.

 

   3. Below are parameters of RH2000 Edge Deburring and Rounding machine for Shipyard:

No.

Item 

Parameter

1

Work piece   width

150 ~ 2000 mm

2

Work piece   thickness

10 ~ 40mm

3

Work piece   length

1000 ~ 12000mm

4

Suit H-beam   Min web beam height

320mm

5

Rounding   speed

7200mm/min

6

Rounding   radius

R2.5mm

7

Main rollers   diameter

φ300mm

8

Hydraulic   station

4 kW

9

Max pressure   in hydraulic system

12 MPa

10

Input and Output   Conveyor length

10m each

11

Machine   total power

10.6kW

12

Power

380V, 50Hz, 3P


Home

WUXI AMASS MACHINERY CO., LTD
WUXI JACK TECHNOLOGY CO., LTD
0510-83297829
English Language: 15852755799; 
Chinese Language: 13621515089
No. 2, Ouyang Road, Luoshe Town, Wuxi City, Jiangsu Province, China

CONTACT US
© Wuxi AMASS Machinery Co., Ltd  2021 All Rights Reserved.
备案证书号:苏ICP备13045244号-1