RH-1000 Automatic Strip Edge Rounding Machine for T Beam Production
Home » Products » Edge Rounding Machine » RH-1000 Automatic Strip Edge Rounding Machine for T Beam Production
Share to:

RH-1000 Automatic Strip Edge Rounding Machine for T Beam Production

Quantity:

The RH1000 High Efficiency Edge Rounding machine in the attached picture, shows the lateral view of this compact size Edge Trimming equipment.

 

As introduced in its product family, the RH-series Edge Rounding equipment has several standard models to choose from.

     1. From customer’s perspective, the selection criteria on models of Edge Rounding machine  can be made on below two points:

    1) Size of workpiece to be edge trimmed and rounded: Max. width 1m ~ 3m for standard models;

    2) Application of industry: Generally speaking, the larger models (RH2000/RH3000) are usually Edge Deburring

      and Rounding machine for ship building, bridge industry and or port machinery; While the smaller models

      (RH1000/ RH15000) are usually for T Beam Production and or H Beam production.

 

We have become being familiar with structure and working principle of this automatic Edge Trimming machine.

    2. Below is introduction on some supplementary units of the Edge deburring and Rounding machine:

    2.1  Rounding Scrap Cleaning unit:

     1) It for blowing off the scraps generated in the process of rounding, which is fit at outlet side of machine (in

        the picture, right side);

     2) This unit is pneumatic drive. It is composed of air compressor, control valve, air tube, and blowing tip;

     3) The two pieces of blue color thin tube at the outlet side of machine body sends air to the 2 pieces of blowing

      tip above rounding section of this high power Edge Rounding machine, keeping cleanness condition of the 

      working area all the time;

     4) So long as input& output conveyors are in the state of running, this cleaning unit will be in working status.

    2.2  Conveyor:

     1) There are 10m length of input and output conveyors each equipped with this Edge deburring and Rounding

         machine;

     2) At the forwarding end of input conveyor of the End Plate Trimming machine(Which means, the end of the

       conveyor approximating to machine body), there is alignment unit for keeping correct position of workpiece

      for rounding operation. With this unit, edge of the workpiece for rounding will be leaned against rounding 

      rollers for proper job;

    2.3  Security unit:

     1) Safety is the foremost factor to be taken for both customer and supplier;

     2) With this RH1000 Strip Edge Rounding machine, the deburring and rounding speed of 7200mm/min. is fairly

       fast, and people working around it should take precaution;

     3) The design of machine structure makes rounding unit is at middle of machine body, which means, it is 

       difficult to have direct access to working area;

     4) Besides, to have a double insurance, we have Emergency Stop buttons deployed at both inlet and outlet side

        of machine.

 

   3. Below are parameters of this RH1000 Efficient Edge deburring and Rounding machine for T Beam Production:

No.

Item 

Parameter

1

Work piece   width

150 ~ 1000 mm

2

Work piece   thickness

10 ~ 40mm

3

Work piece   length

1000 ~ 12000mm

4

Suit H-beam   Min web beam height

320mm

5

Rounding   speed

7200mm/min

6

Rounding   radius

R2.5mm

7

Main rollers   diameter

φ300mm

8

Hydraulic   station

4 kW

9

Max pressure   in hydraulic system

12 MPa

10

Input and Output   Conveyor length

10m each

11

Machine   total power

10.6kW

12

Power

380V, 50Hz, 3P



Home

WUXI AMASS MACHINERY CO., LTD
WUXI JACK TECHNOLOGY CO., LTD
0510-83297829
English Language: 15852755799; 
Chinese Language: 13621515089
No. 2, Ouyang Road, Luoshe Town, Wuxi City, Jiangsu Province, China

CONTACT US
© Wuxi AMASS Machinery Co., Ltd  2021 All Rights Reserved.
备案证书号:苏ICP备13045244号-1