Availability: | |
---|---|
Quantity: | |
1) SXBJ-18 is the largest model in product group of XBJ and SXBJ series Edge Milling Machine, with the configuration of one set or two sets of milling heads;
2) Here, “the largest” implicates SXBJ-18 Large Sheet Steel Plate End Beveling Equipment has the longest edge milling stroke of 18000mm. This is the upper limit on the corresponding specification in Edge Milling Machine;
3) Comparatively, the smallest model is XBJ-3 Plate Beveling Machine;
4) The models bigger than SXBJ-18 double heads Edge Milling Machine are those products equipped with 4 sets of milling heads, the typical ones are FXBJ-18 Four Heads Large Sheet Steel Plate Beveling Machine, as well as GFXBJ-23 Super Large Sheet Steel Plate Edge Chamfering Machine;
1) Bigger Thickness of Steel Plate: From 6mm to 100mm in the SXBJ-18 large Edge Milling Machine, compared with 6mm to 40mm or 50mm in small models of Plate Beveling Machine;
2) Wider Range of Milling Angle: 0°~ 90° for upper edge chamfering in the SXBJ-18 large Edge Milling Machine, compared with 0°~ 45° in small models of the Edge Chamfering Machine;
3) Hydraulic Drive Assistant Loading System: This is of vital importance for raw material loading in the SXBJ-18 and other models of Large Sheet Steel Plate Edge Milling Machine;
4) Many Cases Work Outdoors: Large Sheet Steel Plate End Milling Machine has very large overall dimensions, as well as its material processing zone. So, it is difficult to be planned and implemented in indoor workshop. For this reason, SXBJ-18 and many other large Edge Milling Machine are installed and operated in open air surroundings:
1. Industry: Such large scale double heads long stroke Edge Milling Machine is generally selected by customers from industries of Shipbuilding, Port Machinery, Offshore Oil Machinery, etc., for completing various types of welding groove machining, in the form of steel plate beveling carried out in the Edge Milling Machine;
2. Types of Grooves: With the largest ever available stroke of 18m, and two sets of 7.5kW milling units installed, the SXBJ-18 Large Sheet Steel Plate End Beveling Equipment has capability on delivering duties of sheet end chamfering into top bevel/ bottom bevel/ slant edge/ straight edge, without the necessity of two or more times workpiece loading and unloading into and out of the Plate Beveling Machine;
Please check attached 6 pictures of the Wuxi JACK SXBJ-18 large plate Edge Milling Machine, taken from different perspectives at customer site:
1. Main Frame: This SXBJ-18 large plate End Beveling Equipment has mechanical machine bed of 24m length: 18m length working table plus 6m extension mechanical body;
2) As shown in the above photo, there is a row of grounding style loading bracket of 3m depth, (Or, 3m extending width), installed along the whole length of working table, installed at the front side of the SXBJ-18 large plate Edge Milling Machine;
3) This group of front extension bracket is for the purpose of loading and unloading workpiece steel plate into and out of the large size Edge Milling Machine conveniently;
1) The back side of the working table is operating side of the End Milling Machine;
2) There are two sets of milling head carriages installed at this side, and travel in end milling speed during work of the Edge Milling Machine;
1) Trapezoid cross section shape supporting bracket, which is the moving base of the Edge Milling Machine milling carriage;
2) Vertical column above the supporting bracket, which is the trunk for up and down movement of milling head, for the purpose of getting the best position of processing welding groove in the Edge Milling Machine;
3) Two sets of motor for driving horizontal movement of the milling carriage along End Milling Machine 18m long working table, and vertical adjustment on the milling head respectively;
4) The 7.5kW power milling head. 7.5kW is the standard configuration for XBJ and SXBJ series Edge Milling Machine. it can be of higher power such as 9kW/ 11kW when necessary;
5) A downward declining stepped trough in yellow color for discharging scraps generated during Edge Milling Machine operation.
Below are technical specifications of SXBJ-18 Double Heads Large Sheet Steel Plate End Beveling Equipment:
Model Technical parameter | SXBJ-18 Double Heads Large Sheet Steel Plate End Milling Machine |
Max. Plate Edge Milling Length | 18,000 mm |
Max. Plate Edge Milling Width | 3,000 mm |
Plate Thickness Range for Edge Chamfering | 6∼100 mm (Based on Customer Demand) |
Milling Angle Range of Top Milling Unit | 0° to +90° |
Milling Angle of Down Milling Unit | -45° to 0° |
Quantity of Hydraulic Jacks | 30 pieces |
Milling Head Quantity | 2 Sets |
Power and rpm of Milling Head | 7.5 kW, 1440 rpm |
Spindle rpm of Edge Milling Head | 75 ~ 420 r/min., 6 grades by handwheel |
Hydraulic Power Motor | 5.5 kW |
Milling Unit Feeding Motor | 2.2 kW |
Edge Milling Working Speed | 130∼1000 mm/min.(Stepless VFD) |
Idle High Speed of Milling Head Carriage | 4000 mm/min. |
Applicable Diameter of Facer Plate | D=Ø125 ~ Ø320mm (Ø200mm For delivery) |
Hydraulic Rated Pressure | 5.5 MPa |
Hydraulic Working Pressure | 3.5 MPa |
Worktable Width | 550 mm |
Worktable Height | 1050 mm |
1) SXBJ-18 is the largest model in product group of XBJ and SXBJ series Edge Milling Machine, with the configuration of one set or two sets of milling heads;
2) Here, “the largest” implicates SXBJ-18 Large Sheet Steel Plate End Beveling Equipment has the longest edge milling stroke of 18000mm. This is the upper limit on the corresponding specification in Edge Milling Machine;
3) Comparatively, the smallest model is XBJ-3 Plate Beveling Machine;
4) The models bigger than SXBJ-18 double heads Edge Milling Machine are those products equipped with 4 sets of milling heads, the typical ones are FXBJ-18 Four Heads Large Sheet Steel Plate Beveling Machine, as well as GFXBJ-23 Super Large Sheet Steel Plate Edge Chamfering Machine;
1) Bigger Thickness of Steel Plate: From 6mm to 100mm in the SXBJ-18 large Edge Milling Machine, compared with 6mm to 40mm or 50mm in small models of Plate Beveling Machine;
2) Wider Range of Milling Angle: 0°~ 90° for upper edge chamfering in the SXBJ-18 large Edge Milling Machine, compared with 0°~ 45° in small models of the Edge Chamfering Machine;
3) Hydraulic Drive Assistant Loading System: This is of vital importance for raw material loading in the SXBJ-18 and other models of Large Sheet Steel Plate Edge Milling Machine;
4) Many Cases Work Outdoors: Large Sheet Steel Plate End Milling Machine has very large overall dimensions, as well as its material processing zone. So, it is difficult to be planned and implemented in indoor workshop. For this reason, SXBJ-18 and many other large Edge Milling Machine are installed and operated in open air surroundings:
1. Industry: Such large scale double heads long stroke Edge Milling Machine is generally selected by customers from industries of Shipbuilding, Port Machinery, Offshore Oil Machinery, etc., for completing various types of welding groove machining, in the form of steel plate beveling carried out in the Edge Milling Machine;
2. Types of Grooves: With the largest ever available stroke of 18m, and two sets of 7.5kW milling units installed, the SXBJ-18 Large Sheet Steel Plate End Beveling Equipment has capability on delivering duties of sheet end chamfering into top bevel/ bottom bevel/ slant edge/ straight edge, without the necessity of two or more times workpiece loading and unloading into and out of the Plate Beveling Machine;
Please check attached 6 pictures of the Wuxi JACK SXBJ-18 large plate Edge Milling Machine, taken from different perspectives at customer site:
1. Main Frame: This SXBJ-18 large plate End Beveling Equipment has mechanical machine bed of 24m length: 18m length working table plus 6m extension mechanical body;
2) As shown in the above photo, there is a row of grounding style loading bracket of 3m depth, (Or, 3m extending width), installed along the whole length of working table, installed at the front side of the SXBJ-18 large plate Edge Milling Machine;
3) This group of front extension bracket is for the purpose of loading and unloading workpiece steel plate into and out of the large size Edge Milling Machine conveniently;
1) The back side of the working table is operating side of the End Milling Machine;
2) There are two sets of milling head carriages installed at this side, and travel in end milling speed during work of the Edge Milling Machine;
1) Trapezoid cross section shape supporting bracket, which is the moving base of the Edge Milling Machine milling carriage;
2) Vertical column above the supporting bracket, which is the trunk for up and down movement of milling head, for the purpose of getting the best position of processing welding groove in the Edge Milling Machine;
3) Two sets of motor for driving horizontal movement of the milling carriage along End Milling Machine 18m long working table, and vertical adjustment on the milling head respectively;
4) The 7.5kW power milling head. 7.5kW is the standard configuration for XBJ and SXBJ series Edge Milling Machine. it can be of higher power such as 9kW/ 11kW when necessary;
5) A downward declining stepped trough in yellow color for discharging scraps generated during Edge Milling Machine operation.
Below are technical specifications of SXBJ-18 Double Heads Large Sheet Steel Plate End Beveling Equipment:
Model Technical parameter | SXBJ-18 Double Heads Large Sheet Steel Plate End Milling Machine |
Max. Plate Edge Milling Length | 18,000 mm |
Max. Plate Edge Milling Width | 3,000 mm |
Plate Thickness Range for Edge Chamfering | 6∼100 mm (Based on Customer Demand) |
Milling Angle Range of Top Milling Unit | 0° to +90° |
Milling Angle of Down Milling Unit | -45° to 0° |
Quantity of Hydraulic Jacks | 30 pieces |
Milling Head Quantity | 2 Sets |
Power and rpm of Milling Head | 7.5 kW, 1440 rpm |
Spindle rpm of Edge Milling Head | 75 ~ 420 r/min., 6 grades by handwheel |
Hydraulic Power Motor | 5.5 kW |
Milling Unit Feeding Motor | 2.2 kW |
Edge Milling Working Speed | 130∼1000 mm/min.(Stepless VFD) |
Idle High Speed of Milling Head Carriage | 4000 mm/min. |
Applicable Diameter of Facer Plate | D=Ø125 ~ Ø320mm (Ø200mm For delivery) |
Hydraulic Rated Pressure | 5.5 MPa |
Hydraulic Working Pressure | 3.5 MPa |
Worktable Width | 550 mm |
Worktable Height | 1050 mm |