MP35 Cost Effective Plate Butt Joining Machine for Metal Sheet Join
Home » Products » Plate Butt Joining Machine » MP35 Cost Effective Plate Butt Joining Machine for Metal Sheet Join
Share to:

MP35 Cost Effective Plate Butt Joining Machine for Metal Sheet Join

Quantity:

MP35 Cost Effective Plate Butt Joining machine is another middle-sized one of the products. It can fulfil butt join of 2 plates thru one side large current SAW welding or CO2 welding, for the plate of 3.5m width and narrower.

 

   1.  Melt thru technique of the Cost Effective Plate Butt Weld Joining machine:

    1) For successful completion of Melt thru welding on this cost effective Plate Butt Join machine, especially for

        medium and large size plates, copper pads and its water-cooled unit are critical for finishing the job;

    2) There are copper pads cooled with circulating water beneath joint of the plates;

    3) Large current Submerged Arc Welding power is carried out above the plates;

    4) Edges of the both plates are pressed tightly with arrays of hydraulic clamps, during welding process of this

       cost effective Plate Butt Joining equipment;

    5) The copper-pads are elevated integrally under motor drive. It descends down during in-feed and out-feed of

       the plates, and ascends up at the positioning of the plates, and then is pressed firmly against bottom of the 

       welding seam. Its stroke is controlled with photo-electric switch of this Cost Effective Plate Butt Weld Join 

       machine.

 

   2. Meaning of “Cost Effective” for this Cost Effective Plate Butt Weld Joining equipment:

     This cost effective Plate Butt Weld Join equipment doubles productivity by means of:

    1) Remove the welding process of the opposing side of the plates and hence flipping of the plates;

    2) Remove carbon gouging job;

    3) Integrate beveling function.

 

Below are parameters of standard MP35 Cost Effective Plate Butt Join Equipment:

No.

Parameter

MP35

1

Applicable plate thickness

6-40mm (Low carbon steel, Stainless steel or Al alloy)

2

Welding thickness without   beveling

6-15mm

3

Max. welding seam length

(Or Plate width)

3500mm

4

Welding velocity

200-1200mm/min VFD   (Variable Frequency Drive)

5

Welding style

Submerged Arc Welding for thick plate, or

CO2 welding for thin plate

 

 


Home

WUXI AMASS MACHINERY CO., LTD
WUXI JACK TECHNOLOGY CO., LTD
0510-83297829
English Language: 15852755799; 
Chinese Language: 13621515089
No. 2, Ouyang Road, Luoshe Town, Wuxi City, Jiangsu Province, China

CONTACT US
© Wuxi AMASS Machinery Co., Ltd  2021 All Rights Reserved.
备案证书号:苏ICP备13045244号-1