MP30 Plate Butt Joining Machine for Sheet Join
Home » Products » Plate Butt Joining Machine » MP30 Plate Butt Joining Machine for Sheet Join
Share to:

MP30 Plate Butt Joining Machine for Sheet Join

Quantity:

MP30 Sheet Butt Welding Joining equipment is the middle-sized one of its product group. It is for plate butt join of max.3m width, by means of large current submerged arc welding, and or GMAW CO2 welding.

 

Main units of the MP30 Sheet Butt Weld Join equipment:

   1) Machine frame of the Sheet Butt Welding Join equipment:

     - It is Gantry-type, with the incoming side installed with optional triple cutting unit, and outcoming side fit with

       the welding unit;

   2) Input and Output conveyor of the Plate Butt Joining Machine:

     - Standard length is 6m for input and 15m for output;

     - One driving segment for input conveyor, and two driving segments for input conveyor;

     - Customer can denote their required length for the specific set of this Plate Butt Weld Joining machine;

   3) Downward Pressing unit of the Plate Butt Welding Joining machine:

     - There are 2 arrays of pressing unit installed on the outcoming side of the gantry frame, for holding down the

        2 plates during welding (One array for one piece of plate respectively);

     - This pressing unit is hydraulic driven;

    4) Welding unit of the Plate Butt Weld Join Machine:

     - Including one set of welding power supply equipped with operating panel, welding torch, flux recovery unit 

       (SAW only), for welding process of this Plate Butt Welding Join machine;

    5) Copper Pads of the Plate Butt Joining Equipment:

     - This unit is installed beneath the workpiece, and worked in the form of upward stroke. Which means, it 

       pressed the plates tightly against the plates bottom;

     - It is for forcing formation of weld seam during welding process;

     - It is water cooled;

   6) Copper Pads Elevating unit of the Plate Butt Join Machine:

    - It is motor drive and for manipulating the above-mentioned copper pads along vertical direction;

   7) Water-cool System of the Sheet Butt Weld Join Equipment:

    - It is for heat dissipation of the above-mentioned copper pads during welding process;

    - It utilizes circulating water. There is a water tank alongside the machine;

   8) Hydraulic System of the Sheet Butt Welding Join Equipment:

    - It is for driving the item3 downward pressing unit of this Plate Butt Weld Joining machine;

   9) Control system of the Plate Butt Joining machine: Inverter and other elements.

 

The MP-series Plate Butt Weld Joining machine has reasonable structure equipped with high quality outsourced parts, which is easy for operation and maintenance.

 

Below are parameters of standard MP30 Plate Butt Weld Join machine:

 

No.

Parameter

MP30

1

Applicable plate thickness

6-40mm (Low carbon steel, Stainless steel or Al alloy)

2

Welding thickness without   beveling

6-15mm

3

Max. welding seam length

(Or Plate width)

3000mm

4

Welding velocity

200-1200mm/min VFD   (Variable Frequency Drive)

5

Welding style

Submerged Arc Welding for thick plate, or

CO2 welding for thin plate

 

 


Home

WUXI AMASS MACHINERY CO., LTD
WUXI JACK TECHNOLOGY CO., LTD
0510-83297829
English Language: 15852755799; 
Chinese Language: 13621515089
No. 2, Ouyang Road, Luoshe Town, Wuxi City, Jiangsu Province, China

CONTACT US
© Wuxi AMASS Machinery Co., Ltd  2021 All Rights Reserved.
备案证书号:苏ICP备13045244号-1