LHT T Type High Precision H Beam Submerged Arc Welding Machine
Home » Products » H Beam Submerged Arc Welding machine » LHT T Type High Precision H Beam Submerged Arc Welding Machine
Share to:

LHT T Type High Precision H Beam Submerged Arc Welding Machine

Quantity:

As summing up on introduction of this family of H Beam submerged arc welding machine, including:

  - LHA-series (LHAZ& LHAC) Automatic I Beam Gantry Weld Equipment;

  - LHC Column type Automatic H Beam SAW machine;

  - LHT T type heavy duty H Beam submerged arc welding machine

We have covered below topics in previous products:

  1) Machine outline on usage;

  2) Structure, Composition, Advantage and Disadvantage of each model;

  3) Common Points and Difference among models;

  4) SAW Welding Modes and Parameters;

  5) Operation, Operating Panel, Maintenance and Service;

  6) Introduction on Self Made Components, Parts and of the machine;

  7) Outsourced Units of the machine (Welding Power Source/ Flux Recovery & Recycling unit& Inverter);

  8) Installation, Adjustment and daily Service of the machine, etc.

In these 22 models of H Beam submerged arc welding machine.


Below are some supplements for this LHT T type, and LHC column type, and LHA large I Beam gantry weld equipment:

  1) As a machine with frequent to-and-fro movement, arrangement of cables is very important.

    - For those involved with movement of T frame, the cables are deployed with overhead hanging rack along

      side the rails;

    - For those involved with movement along beam of T frame, the cables are deployed with drag chain;

     Please check below picture marked in red-color square frame:

Small- Hanging Rack


  2) For the ease of maintenance on the LHT (LHC and LHA heavy duty I Beam gantry weld equipment also), there

      is platform on the top of frame, surrounded with guard-rail, and accessed with ladder. Please check below

     picture, marked in red-color square frame:

Small Alarm light and platform


  3) For got informed first time when contingency happens, there is an alarm light fit at top of the machine, very

     eye catching, Please check the above picture, marked in red-color square frame also;

  4) For operators of the LHT (LHC and LHA I Beam gantry weld equipment also)

    -  Before operating the machine, operator should read and understand manual book, being familiar with 

       structure, operation and adjustment, has the capability on operating the SAW machine;

   -  Operator should have trial run on the SAW machine;

   -  Being familiar with its pushbuttons;

   -  Confirm all units are in normal state;

    - Make adjustment on welding parameters. In All, make good preparation on SAW welding process

 

As summary, we expect with these 22 models of H Beam submerged arc welding machine, together with special-made ones, we can provide solution on H Beam SAW for customers of best fit.


Below are specifications of this LHT T type Automatic H Beam Submerged Arc Welding machine:

Parameter

Specification

Note

Operator Working Position

Beneath T frame, between 2 supporting racks,

stand on the floor

H Beam Flange Width (mm)

200 ~ 800


H Beam Flange Thickness (mm)

6 ~ 40

Can be special made

H Beam Web Height (mm)

200 ~ 2000


H Beam Web Thickness (mm)

6 ~ 32

Can be special made

H Beam Length   (mm)

4000 ~ 15000

Can be special made

Gantry  Travel Rail Length (mm)

18000


Gas Pressure

0.4~0.6Mpa

For driving Arc tracing unit and flux recovery unit

Submerged Arc Welding type

45° fillet welding


Submerged Arc Welding mode

Single Arc,

Or   Tandem Arc


Welding Power Source brand and model

Chinese HUAYUAN or

U.S.A Lincoln

ZD7-1000   or

DC-1000

SAW Welding speed (mm/min.)

240 ~ 2400


Idle speed (mm/min.)

3200


 



Home

WUXI AMASS MACHINERY CO., LTD
WUXI JACK TECHNOLOGY CO., LTD
0510-83297829
English Language: 15852755799; 
Chinese Language: 13621515089
No. 2, Ouyang Road, Luoshe Town, Wuxi City, Jiangsu Province, China

CONTACT US
© Wuxi AMASS Machinery Co., Ltd  2021 All Rights Reserved.
备案证书号:苏ICP备13045244号-1