Multi-Functional Up And Down Grooving SXBJ-3 Edge Milling Machine

A. Technical Characteristics and Function of SXBJ-3 Automatic Sheet Metal Plate End Edge Milling Machine:

1. Technical Features of SXBJ-3 Automatic Sheet Metal Plate End Edge Beveling Machine:

1) SXBJ-3 is the smallest model of SXBJ series Double Heads Plate End Edge Milling Machine, in terms of edge milling stroke: Maximum 3000mm effective length;

2) The attached first, second and below photos show mechanical main body of Wuxi JACK SXBJ-3 Automatic Sheet Metal Plate End Edge Chamfering Machine: (Fig.1)

3) Comparatively, the largest model in this product group is SXBJ-18 Automatic Sheet Metal Plate End Edge Milling Equipment;

2. Function of SXBJ-3 Automatic Sheet Metal Plate End Edge Beveling Machine:

1) SXBJ-3 is a kind of compact size but with multi-functional capability Plate End Edge Milling Machine:

2) Equipped with 2 sets of milling head with different assembling orientation, both top and straight edges, as well as bottom edge bevels can be made in this plate End Edge Milling Equipment. Shown in below photo:

3) The 2 sets of milling head carriages assembled in different positions, in Wuxi JACK SXBJ-3 Plate End Edge Milling Machine: (Fig.2)

3. Application of SXBJ-3 Automatic Sheet Metal Plate End Edge Milling Equipment:

1) With max. valid plate edge chamfering stroke of 3000 mm, this SXBJ-3 Double Heads Plate End Edge Milling Machine is basically used for making welding groove on upper and lower edges chamfers simultaneously, implemented on small and medium size workpiece steel plates in high efficiency, which is a niche product End Edge Beveling Machine for meeting specific demand on specific workpieces;

2) Wuxi JACK SXBJ-3 Automatic Sheet Metal Plate End Edge Chamfering Machine is making bottom chamfers on a piece of small workpiece steel plate: (Fig.3)

3) Advantage: The SXBJ-3 Plate End Edge Milling Machine is very handy and convenient for operation: With a set of operating pendant hang on the control board and moved along with milling carriage during work of the End Edge Beveling Machine, the parameter setting up before operation, together with monitor in the process of plate edge beveling, are all within reach of arm’s length for operator of the End Edge Milling Machine;

4) Operation of Wuxi JACK SXBJ-3 Compact Size End Edge Milling Machine: (Fig.4)

4. Put into Use of SXBJ-3 Automatic Sheet Metal Plate End Edge Chamfering Machine:

1) Same as the remaining models of XBJ and SXBJ series Automatic Sheet Metal Plate End Edge Milling Machine, this SXBJ-3 End Edge Beveling Machine can be used for welding groove making on upper and lower edges chamfers, completed in one time stroke of milling head carriage movement, which is accomplished by means of coordination of the two pieces of edge milling heads:

2) The 6 classical types of X/ Y/ K /V grooving available to be made from SXBJ models Double Heads Plate End Edge Milling Machine: (Fig.5)

B. Key Points and Productivity Analysis on Operation of End Edge Milling Machine:

1. Classification on Chamfered Grooves Produced from End Edge Chamfering Machine:

For finished products from Automatic Sheet Metal Plate End Edge Beveling Machine, all the chamfers and bevels can be grouped into three broad categories of:

1) Top or upper edges chamfers and bevels, that can be produced from Sheet Metal Plate End Edge Chamfering Machine: (Fig.6)

2) Bottom or lower edges chamfers and beveling, that can be produced from Double Heads Sheet Metal Plate End Edge Milling Machine; (Fig.7)

3) Straight or slant edges beveling and grooves, that can be produced from Sheet Metal Plate End Edge Beveling Machine; (Fig.8)

2. Installation of Milling Heads in Double Heads Plate End Edge Milling Machine:

1) Assembling orientation of milling heads on the Plate End Edge Beveling Machine determines it can pick up only one type of the categories:

a) Either for making top edge chamfers and bevels, together with straight and slant edges;

b) Or for making bottom edges chamfers and bevels;

2) With one time stroke of plate edge beveling in plate End Edge Milling Machine, the former type of milling head can only fulfil one type of chamfer: top edge chamfer, or straight edge groove in End Edge Beveling Machine;

3) Suppose both types of grooving are necessary, the milling head needs to have back and

forth two times running stroke along worktable of the plate End Edge Chamfering Machine;

3. In this sense, for completing the complicated workpiece with top, bottom and straight edges grooves, are all necessary on its edges in the Plate End Edge Milling Machine:

1) In Double Heads SXBJ series Sheet Metal Plate End Edge Milling Machine, the major steps cover one time of loading and unloading of workpiece steel plate, and two times running of the two sets of milling head carriage;

2) As in the case of single head Plate End Edge Milling Equipment, the major step cover two times of loading and unloading, flipping the workpiece 180°, and three times running of the milling unit in the End Edge Milling Machine;

3) This shows the productivity difference between double head SXBJ models and single head XBJ models Sheet Metal Plate End Edge Milling Machine.

C. Technical Parameters of SXBJ-3 Automatic Sheet Metal Plate End Edge Milling Machine:

Below are technical parameters of this SXBJ-3 Double Heads Automatic Sheet Metal Plate End Edge Chamfering Machine: